The BMC web application allows provisioning of NTP server. When the NTP server setting is configured through BMC/CLI, the value is automatically updated in the EMA.
Info
The SBC supports up to three NTP servers.
Use the following procedure to configure the NTP server using BMC:
Log on to the SBC BMC using the IP address configured in the previous section.
At the prompt, enter:
Username:root
Password:<root_password>
The SBC BMC main screen appears.BMC Main Screen
Click Configuration > NTP and Date Time Settings. The Date/Time and NTP Server Setting screen is displayed.
NTP Server Setting Screen
Select Automatically synchronize Date & Time with NTP Server option and enter the Primary NTP Server and Secondary NTP Server (not mandatory) IP addresses.
Entering NTP Server
- Click Save to save the edits made to NTP Settings.
Overview
Content Tools