In this Section:
Related Articles:
Earlier, in
Unable to show "metadata-from": No such page "_space_variables"
/Unable to show "metadata-from": No such page "_space_variables"
, only the management interface group was used to handle the external PSX traffic. Now, the Packet Interfaces handle the external PSX traffic. The following three new parameters are added to Global Configuration of Policy Server as an enhancement:typeaddressContextinterfacesGroupId
To View and Edit Global Config
On SBC main screen, go to Configuration > System Setup > Policy Server > Global Config. The Global Config window is displayed.
Type: ip
By default, the Global Config window is displayed with the Type as Mgmt.
Policy Server - Global Config Mgmt
Type: mgmt
Policy Server - Global Config IP
Make the required changes and click Save to save the changes.
The following fields are displayed:
Policy Server - Global Config parameters
Parameter | Description |
|---|---|
| Specifies the time interval in seconds for re-attempting the connection to Policy Server which is in the enabled state. The value ranges from 1 - 3600 seconds and the default value is 10 seconds. |
Switch Over Mode | Specifies the means to connect to the active Policy Server. The options are:
|
| When enabled, SBC throttles the sending or Policy Requests to either active or standby PSX. The options are:
|
| Specifies the type of Interface Group used. The options are:
|
| Specifies all the valid Address Contexts. This parameter is only visible when the attribute, |
Ip Interface Group | Specifies all the valid IP Interface Group that belongs to the configured Address Contexts. This parameter is only visible when the attribute, |
Mgmt Interface Group | Specifies all the valid Management Interface Groups available to communicate with external PSX. This parameter is only visible when the attribute, |
Overview
Content Tools