You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Configuring the Call Data Channel

To configure Call Data Channel (CDC):

Configuring CDC with IP Interface Group

To create CDC, refer to the section Configuring SBC For Lawful Interception.

% set addressContext default intercept callDataChannel CDC ipInterfaceGroupName LIG1
commit

Mediation server’s ipInterfaceGroup must be different from other signaling ipInterface groups. This ensures that LI doesn't use signaling ipAddress to send intercepted traffic (media/signaling) towards Mediation Server.

Configuring CDC for Intercept Flavor as IMS LI

For other options of configuring the intercept flavor as IMS LI, refer to the section Configuring SBC For Lawful Interception.

% set addressContext default intercept callDataChannel CDC interceptStandard etsi vendorId verint
commit

Configuring CDC for Media Interception Over TCP

% set addressContext default intercept callDataChannel CDC mediationServer MS1 media tcp ipAddress 10.54.78.20 portNumber 65120
commit
% set addressContext default intercept callDataChannel CDC mediationServer MS1 media tcp state enabled mode inService
commit 

Configuring CDC for Media Interception Over UDP

% set addressContext default intercept callDataChannel CDC mediationServer MS1 media udp ipAddress 10.54.78.20 portNumber 65200
commit
% set addressContext default intercept callDataChannel CDC mediationServer MS1 media udp state enabled mode inService
commit 

Configuring CDC for Signaling Interception

% set addressContext default intercept callDataChannel CDC mediationServer MS1 signaling ipAddress 10.54.78.25 portNumber 65300 protocolType tcp
commit
% set addressContext default intercept callDataChannel CDC mediationServer MS1 signaling state enabled mode inService
commit

The protocolType "udp" is not supported for Signaling interception in this release.

Configuring CDC for RTCP Interception

% set addressContext default intercept callDataChannel CDC rtcpInterception enabled
commit

The rtcpInterception parameter is visible, when interceptStandard and vendorId is configured as IMS LI

Configuring CDC for "Li Pol Dip For Regd Ood Msg"

The parameter liPolDipForRegdOodMsg when enabled is used to indicate SBC to send policy request to PSX for registered Out-Of-Dialog requests(messages) to be intercepted. When this parameter is disabled, policy request is not sent to PSX for registered Out-Of-Dialog requests (messages).

Enable the support for Policy dip, for registered users out-of-dialog messages, to decide on interception, by executing the command

% set addressContext default intercept callDataChannel CDC liPolDipForRegdOodMsg enabled
commit

The liPolDipForRegdOodMsg  parameter is visible, when interceptStandard and vendorId is configured as IMS LI.

Viewing IMS LI Configuration

Enter the show commands to view the configurations.

Viewing the Intercept Details

To view the intercept details, execute the following command:

 > show status addressContext default intercept callDataChannel
callDataChannel CDC {
    mediationServerMediaStatus MS1 {
        tcpChannelstatus outOfService;
        tcpPacketsSent   0;
        tcpPacketsLost   0;
        udpPacketsSent   0;
        udpPacketsLost   0;
    }
    mediationServerSignalingStatus MS1 {
        tcpChannelStatus outOfService;
        DSRSuccess       0;
        DSRFailures      0;
    }
}
[ok]

Viewing the CDC Configuration

To view the CDC configuration, execute the following command:

 % show addressContext default intercept callDataChannel CDC
interceptStandard     threeGpp;
vendorId              utimaco;
ipInterfaceGroupName  LIG1;
liPolDipForRegdOodMsg enabled;
rtcpInterception      enabled;
mediationServer MS1 {
    signaling {
        ipAddress  10.70.54.48;
        portNumber 9632;
        mode       inService;
        state      enabled;
    }
    media {
        tcp {
            ipAddress  10.70.54.48;
            portNumber 8007;
            mode       inService;
            state      enabled;
        }
        udp {
            ipAddress  10.70.54.48;
            portNumber 7241;
            mode       inService;
            state      enabled;
        }
    }
}
[ok]

  • No labels