You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Back to Table of Contents

Back to Configuration

Back to Configuration - Profile Management

Back to Profile Management - Media Profiles

Back to Media Profiles - Packet Service Profile

Defines the codec entry priorities and codec names. Up to 12 codec configurations are supported by SBC in PSX and Advanced ERE deployment scenarios (see  Routing and Policy Management for a description of the different routing configurations).

Note

The PSX supports configuring up to 12 codecs in the Packet Service Profile and Preferred Packet Service Profile. The SBC supports receiving all 12 codecs from the PSX in the PSP and Preferred PSP. This applies to interworking with an external PSX (Advanced ERE deployment scenario). See Routing and Policy Management for deployment scenario details.

Additionally, the SBC supports up to 12 codecs over Gateway links to SBCs and/or GSXs.

Note

An SBC-POL-RTU license is needed to enable more than four codecs.

For each codecEntry ID, select a codec name. Example default codec names are:

  • G711-DEFAULT (default codec)
  • G711SS-DEFAULT
  • G711_NONE
  • G723-DEFAULT
  • G723A-DEFAULT
  • G726-DEFAULT
  • G729A-DEFAULT
  • G729AB-DEFAULT

To View and Edit Codec

On SBC main screen, go to Configuration > Profile Management > Category: Media Profiles > Packet Service Profile > Codec.

Select the desired Packet Service Profile from the drop-down list to view its respective Codec parameters.

The Codec window is displayed.

Profile Management - Media Profiles - Packet Service Profile - Codec

The following fields are displayed:

Packet Service Profile - Codec

Parameter

Description

codecEntry1

This attribute specifies the codec entry with a priority of 1.

codecEntry2

This attribute specifies the codec entry with a priority of 2.

codecEntry3

This attribute specifies the codec entry with a priority of 3.

codecEntry4

This attribute specifies the codec entry with a priority of 4.

codecEntry5This attribute specifies the codec entry with a priority of 5.
codecEntry6This attribute specifies the codec entry with a priority of 6.
codecEntry7This attribute specifies the codec entry with a priority of 7.
codecEntry8This attribute specifies the codec entry with a priority of 8.
codecEntry9This attribute specifies the codec entry with a priority of 9.
codecEntry10This attribute specifies the codec entry with a priority of 10.
codecEntry11This attribute specifies the codec entry with a priority of 11.
codecEntry12This attribute specifies the codec entry with a priority of 12.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels