You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to All

Back to All - Address Context

Back to Address Context - Intercept

In this section:

This object displays the user configured LI Call Data Control Channel.

To View Call Data Channel

To view Call Data Channel, log on as "Calea" user. For more information, refer to Users and Application Management - User and Session Management.

On SBC main screen, navigate to Address Context > Intercept > Call Data Channel.

The Call Data Channel can be checked for default Address Context. Use the drop-down box to select the default Address Context.

Intercept - Call Data Channel Main Field

The Call Data Channel window is displayed.

Intercept - Call Data Channel

 

To Edit Call Data Channel

To edit any of the Call Data Channel in the list, click the radio button next to the specific Call Data Channel name.

Intercept - Call Data Channel Highlighted

 

The Edit Selected Call Data Channel window is displayed below.

Intercept - Call Data Channel Edit Window

 

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Call Data Channel

To create a new Call Data Channel, click New Call Data Channel tab on the Call Data Channel List panel.

Intercept - Call Data Channel Fields

 

The Create New Call Data Channel window is displayed.

Intercept - Call Data Channel Create Window

 

The following fields are displayed:

Call Data Channel Parameters

Parameter

Description

Name

Specifies the name of the IP interface group used to stream to the LI Server.

Pri State

Specifies if the communication to the primary LI Server is enabled or not. Options are:

  • enabled
  • disabled

Sec State

Specifies if the communication to secondary LI Server is enabled or not. Options are:

  • enabled
  • disabled

Pri Mode

Specifies the mode of the primary server. Options are:

  • active
  • standby
  • out of service

Sec Mode

Specifies the mode of the secondary server. Options are:

  • active
  • standby
  • out of service

Pri IP Address

Specifies the primary LI Server's IP address where Call Data Channel messages are sent.

Sec IP Address

Specifies the secondary LI Server's IP address where Call Data Channel messages are sent.

Pri Port

Specifies the primary LI Server's UDP port where Call Data Channel messages are sent.

Ka Timer

Specifies the Keep Alive Timer in seconds.

Retries

Specifies the number of retries before LI Call Data Channel is considered failed.

IP Interface Group Name

Specifies the name of the IP interface group used to stream to the LI Server.

To Copy Call Data Channel

The user calea with the role "Calea" is not allowed to perform "Copy" operation.

Copy operation information for Call Data Channel

 

To Delete Call Data Channel

To delete any of the created Call Data Channel, click the radio button next to the specific Call Data Channel which you want to delete.

Intercept - Call Data Channel Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Intercept - Call Data Channel Delete Confirmation

Click OK to remove the specific Call Data Channel from the list.

 

  • No labels