You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

In this section:


IP Interface Group details for this address context.

 

IP Interface Group

Command Syntax

> show table addressContext <addressContext_name> ipInterfaceGroup <IG name> 
	ipInterface
	ipInterfaceStatus
	ipsec
	mediaPortRangeAssigned
	mediaPortRangeUnassigned
	tcpPortRangeAssigned
	tcpPortRangeUnassigned

Command Parameters

IP Interface Group Parameters

ParameterDescription
<Interface Group name>The name of an IP interface group. Enter IP interface group name or “any” to match any IP interface group.
ipInterface

This attribute displays IP Interface status details. See IP Interface section below for details.

NOTE: This attribute only applies to the 'show table' command.

ipInterfaceStatus

IP interface statistics for this IP interface group. See IP Interface section below for details.

ipSec

Administrative state of the IPsec support for this interface group.

NOTE: This attribute only applies to the 'show table' command.

mediaPortRangeAssigned

The used media port ranges on this IP interface group.

  • baseUdpPort
  • maxUdpPort
  • maxSessions
  • mediaIpAddress
  • tgName
mediaPortRangeUnassigned

The unused media port ranges on this IP interface group.

  • baseUdpPort
  • maxUdpPort
  • maxSessions
tcpPortRangeAssigned 

 The used TCP port ranges on this IP interface group.

  • baseServerPort
  • maxServerPort
  • maxSessions
  • mediaIpAddress
  • tgName

tcpPortRangeUnassigned 

The available TCP port ranges on this IP interface group.

  • baseServerPort
  • maxServerPort

  • maxSessions

IP Interface

Command Syntax

> show table addressContext <addressContext_name> ipInterfaceGroup <IG name> ipInterface

> show table addressContext <addressContext_name> ipInterfaceGroup <IG name> ipInterfaceStatus

Command Parameters

IP Interface Group Parameters

ParameterDescription
ipInterface

This object displays IP Interface statistics with the following fields:

  • action – The action when putting this IP interface out of service (dryUp, force)

  • altIpAddress – The IP Address of the Interface.

  • altPrefix – The IP subnet prefix of this IP Interface.

  • bandwidth – The bandwidth limit (in bytes/second) for this IP interface.

  • bwContingency – The percentage of the overall IP interface bandwidth reserved for contingency.

  • ceName – Name of SBC node that hosts the port used by this IP interface.

  • dryupTimeout – The dryup timeout (in minutes).

  • ipAddress – The IP Address of the Interface.

  • mode – The operational mode for this IP interface.

  • portName – The port name used by this IP interface.

  • prefix – The IP subnet prefix of this IP Interface.

  • state – Administrative state of the IP interface.

  • vlanTag – The VLAN TAG assigned to this IP interface.

ipInterfaceStatus

Status of the IP interface named in this IP interface group.

  • <IP Interface name>
  • allocatedBandwidth – Bandwidth allocated on this IP interface.
  • bwDeviation – Deviation of actual bandwidth from allocated bandwidth.
  • ifindex – The interface index of the LIF.
  • localIpType – Type of IP (static, learned, learnedDhcp, learnedVirtual)
  • numMediaStreams – Number of active media streams on this IP interface.
  • oosReason – The Out Of Service reason for this IP interface.
  • operState – The operational state.

    • admnDisabled – IP Interface state is disabled (after enabling it once)

    • admnDisabledNoLicense –

    • admnEnabled – IP Interface state is enabled

    • deallocDryup – IP Interface action is dryUp and mode is outOfService

    • deallocForce1 – IP Interface action is force and mode is outOfService

    • deallocForce2 – IP Interface action is force  and mode is outOfService (the timer initiated in deallocForce1 state has expired)

    • null – Initial state when IP Interface mode is outOfService and state is disabled

    • remoteCreated – IP Interface mode is outOfService and state is enabled

    • remoteCreating – Interim state: Once IP address is created and initiation of packet LIF creation

    • resAllocated – Final state: When IP Interface mode is inService and state is enabled

    • resAllocating – Interim state: Follows remoteCreating state. state from above state after sending request to enable packet LIF in NP

  • rxActualBandwidth – Actual receive bandwidth in use on this IP interface.
  • rxPackets – Number of packets received on this IP interface.
  • txActualBandwidth – Actual transmit bandwidth in use on this IP interface.
  • txPackets – Number of packets sent on this IP interface.

  • No labels