You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

In this section:

 

This section provides information on logging into and exiting the 

Unable to show "metadata-from": No such page "_space_variables"
command line interface.

Logging In

Perform the following steps to login to 

Unable to show "metadata-from": No such page "_space_variables"
CLI at System level:

  1. Use PuTTY or other terminal emulator to connect to the

    Unable to show "metadata-from": No such page "_space_variables"
    server on port 22.


     

  2. At the login prompt, enter login ID and password. The default login and password name is “admin”.

    login as: admin
    admin@10.11.12.111's password: *****


    A message similar to the following appears:

    admin connected from 10.11.12.13 using ssh on sbx1.eng.sonusnet.com
    Your last successful login was at 2013-8-22 11:45:1
    Your last successful login was from 127.0.0.1
    admin@server1>

As a security measure, the following information may display upon login depending upon user access activity against your system. In the example above, items 1 and 2 display after a successful login.

admin connected from 10.11.12.111 using ssh on MYSBC
Your last successful login was at 2014-5-15 18:32:21
Your last successful login was from 10.11.12.111
Your last unsuccessful login was at 2014-5-15 18:33:7
Your last unsuccessful login was from 20.30.40.50
There was 1 unsuccessful login attempt after your last login 

Rows 4, 5 and 6 display only when logging in immediately after an unsuccessful login to serve as a warning about a possible unauthorized attempt to access your system.

Exiting the CLI

To exit the System-level CLI, type exit at the prompt. For example, 

admin@MYSBC> exit

Depending upon your method to access CLI, either a message similar to the following appears or your terminal session closes.

Connection to MYSBC closed
  • No labels