You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
The
Unable to show "metadata-from": No such page "_space_variables"
hardware platform comes equipped with four media ports and is available in three models based on the media port configuration. Customers must purchase the appropriate model based on their interface and capacity requirements.
The media ports are enabled on the chassis depending upon the network interface license installed.
SBC 5400 Interface Modes and Media Port Assignments
Interface Mode | Port Assignments (Active Media Ports) | SFP Types | License Required |
---|
1x10Gb | 0 | 10Gb SFP in Media Port 0 | SBC-1X10GMP |
2x1Gb | 0, 1 | 1Gb SFPs in Media Port 0 and 1 | None. Enabled by default |
4x1Gb | 0, 1, 2. 3 | 1Gb SFPs in all four media ports | SBC-4X1GMP |
Customers may upgrade or change the licensed network interfaces on their
Unable to show "metadata-from": No such page "_space_variables"
systems after initial purchase as below, as needed.
SBC 5400 Network Interface Upgrade Options
From | To |
---|
2x1Gb | 4x1Gb |
2x1Gb | 1x10Gb |
4x1Gb | 1x10Gb |
1x10Gb | 4x1Gb |
Note
A media port operating in 10GbE mode supports 10Gb/s speed, full-duplex only and auto-negotiations is unsupported in this mode. Media ports operating in 1GbE mode supports operation at 1Gb/s speed, full duplex mode only with auto-negotiation enabled.