The re-installation of ISO is required:
- When incorrect management IP address is configured
- Customers who already evaluated the special or Engineering release and want to update to a new GA release
To re-install the SWe ISO:
Right-click the VM instance name and click Edit Settings.
Force BIOS Setup
Click Options tab.
Click Boot Options.
Check the Force BIOS Setup option and click OK.
Force BIOS Setup
- Click Hardware tab.
- Click CD/DVD drive 1.
Click Browse... Select the ISO image software file. For example, the ISO file name is sbc-V05.01.00A503-connexip-os_03.01.00-amd64.iso. Click OK to close the Browse Datastores window.
Check the Connect at power on option and click OK.
Hardware Tab
Right-click the VM instance and click Power > Power On. The BIOS setup window appears.
Use right-arrow key to navigate to the Boot tab.
Use down-arrow key to select CD-ROM Drive option.
Boot Option
Press + or - key to bring the CD-ROM Drive option to the top of the boot order.
CD ROM First Option
Press F10 to Save and Exit. A setup confirmation appears.
Click Yes to save and exit.
F10 Confirmation
The Connex IP OS Window appears. Select Install and press Enter.
ISO Install Screen
- After the setup is run successfully, right-click the VM instance name and click Edit Settings.
Click Hardware tab.
Click CD/DVD drive 1.
Uncheck the Connect at power on option and click OK.
Uncheck Connect Power On
Click Options tab.
Click Boot Options.
Check the Force BIOS Setup option and click OK.
Force BIOS Setup
- Right-click the VM instance name and click Power > Power On to display the BIOS setup window.
- Use the right-arrow key to navigate to Boot tab
- Use down-arrow key to select CD-ROM Drive option.
Press + or - key to change the boot order for CD-ROM Drive back to its original.
Press F10 to Save and exit and to power back your VM.
Changing back to original order
Overview
Content Tools