You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Back to Table of Contents

Back to All

Back to All - Global

Back to Global - Servers

Back to Global - Servers - Enum Service

Use this page to view/edit Enum Service flags.

To View and Edit Flags

On SBC main screen, go to All > Global > Servers > Enum Service > Flags

Select the desired Enum Service from the drop-down list to view its respective Flags parameter.

Global - Servers - Enum Service - Flags Main Field

 

The Flags window is displayed.

Global - Servers - Enum Service - Flags


 

The following field is displayed:

Flags Parameters

Parameter

 Description

Active

Status of the Enumeration. The options are disable and enable.

Process Calling Number

Enable this flag to analyze the calling number using prefix profile.

When this flag is disabled, the calling number is not analyzed and hence if it has +CC, the same is sent as-is to SBC in the calling number field in policy response. The options are:

  • enable
  • disable (default)
Process New ANI

When this flag is enabled for ENUM AoR service, and ENUM AoR response contains "newani=<some_number>" parameter in NAPTR record, the ERE overwrites the existing calling number of the call with the newANI number.

When this flag is disabled, any newANIparameters received in NAPTR response are ignored in PES. The options are:

  • enable
  • disable (default)

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

  • No labels