In this section:
Use this profile to configure the Unable to show "metadata-from": No such page "_space_variables" active profile name using the built-in standard profiles.
This feature is only applicable when four or more vCPUs are configured.
For Unable to show "metadata-from": No such page "_space_variables" (D-SBC), the profiles are automatically configured based on the personality. These profiles prevent reboot during instantiation.
SBC SWe Cloud Automatic Configuration
Personality Type | Profile Name |
|---|---|
| I-SBC | default |
| S-SBC | standard_signaling_profile |
| M-SBC | standard_msbc_profile |
Command Syntax
% set system sweActiveProfile <profile name> default standard_callmix_profile standard_msbc_profile standard_passthrough_profile standard_signaling_profile standard_transcoding_profile
Command Parameters
Note
Once the distribution of vCPUs is set,
Unable to show "metadata-from": No such page "_space_variables"
overload behavior functions the same way as the Unable to show "metadata-from": No such page "_space_variables"
hardware platforms.SBC SWe Active Profile Parameters Profiles
Profile | Description |
|---|---|
default | By default, non-cloud instances use the default profile. This profile retains the SBC SWe behavior of earlier release (5.0.x and 5.1.x releases), where signaling and media vCPUs overlap. |
standard_callmix_profile | This profile supports a call mix containing a combination of 90% pass-through and 10% transcoding. |
standard_msbc_profile | This profile gets auto-configured on the cloud-based M-SBC instance.This profile utilizes the vCPUs for pass-through calls. |
standard_passthrough_profile | This profile utilizes the vCPUs primarily for pass-through calls. |
standard_signaling_profile | This profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on the cloud-based S-SBC instance. |
standard_transcoding_profile | This profile utilizes the vCPUs for transcoding calls. |
Overview
Content Tools