This object Specifies various controls that applies to egress Trunk group.
To View and Edit Egress Flags
On SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Egress Flags.
Select the desired Signaling Profile from the drop-down list to view its respective Egress Flags parameters.
The Egress Flags window is displayed.
Signaling Profiles - Signaling Profile - Egrees - Egress Flags
The following fields are displayed:
Signaling Profile - Egress - Egress parameters
| Parameter | Description |
|---|---|
Add Prefix011For International Calls | When this check box is selected, it allows the addition of the prefix 011 for international calls. |
Add Prefix1For Inter Lata Calls | When this check box is selected, allows the addition of the prefix "1" for Inter LATA calls. |
Add Prefix1For Intra Lata Calls | When this check box is selected, allows the addition of the prefix "1" for Intra LATA calls. |
Annex ESupport | Annex E is supported |
Apply Switch Type Cpc Profile | When this check box is selected, enables the CPC/OLI Parameter Mapping feature on the associated Trunk Group(s). |
Call Back When Free Support | When this check box is selected, enables the Call Back When Free feature on the associated Trunk Group(s). The PSX includes the Call Back When Free attribute in the route structure when the Trunk Group is included in the route list. |
Called Number7Digits | When this check box is selected, the 7-digit called number is sent as part of the outgoing signaling protocol. |
Calling Number7Digits | When this check box is selected, the 7-digit calling number is sent as part of the outgoing signaling protocol. |
Change Bearer Cap From3_1KHz To Speech | When the check box is selected, the bearer capability of 3.1 kHz received from the ingress is reset to speech for this outgoing Trunk Group. |
Convert Numbers To E164Format | When this check box is selected, numbers are converted to E.164 format. |
Cpc Mapping | When this check box is selected, enables CPC mapping on the associated Trunk Group(s). |
Dialed Number As Called Number | When this check box is selected, the PSX populates the called number (associated with a returned route) with the dialed number. |
Disable Charging Authority For Chosen Carrier | When this check box is selected, the SBC does not delete the ISUP parameters from the ACM and CPG messages, and it allows the CHG message to transit when it is acting as the chosen carrier. |
Discard Calling And Contract Numbers | When this check box is selected, the SBC will not include the calling and contractor numbers in egress signaling when the calling number NOA is Network Specific and the first digit of the calling number is not 0, or the calling number screening is set to User Provided, Verified, and Failed. |
Discard GAPAddl Clg If Same As Clg Number And Ingress SIP | When this check box is selected, for SIP-to-ISUP calls, the SBC does not include the GAP additional calling number in the egress signaling if it is the same as the original calling number. |
Discard Tns And Trunkgroup Owning Carrier Match | When this check box is selected, causes the TNS parameter to be discarded when it matches the Owning Carrier assigned to the egress Trunk Group. |
Dont Strip Clg Number For Restricted Presentation | When this check box is selected, the PSX does not strip (delete) the digits of the calling number for restricted presentation. |
Add Prefix011For International Calls | When this check box is selected, it allows the addition of the prefix 011 for international calls. |
Add Prefix1For Inter Lata Calls | When this check box is selected, allows the addition of the prefix "1" for Inter LATA calls. |
Add Prefix1For Intra Lata Calls | When this check box is selected, allows the addition of the prefix "1" for Intra LATA calls. |
Annex ESupport | Annex E is supported |
Apply Switch Type Cpc Profile | When this check box is selected, enables the CPC/OLI Parameter Mapping feature on the associated Trunk Group(s). |
Call Back When Free Support | When this check box is selected, enables the Call Back When Free feature on the associated Trunk Group(s). The PSX includes the Call Back When Free attribute in the route structure when the Trunk Group is included in the route list. |
Called Number7Digits | When this check box is selected, the 7-digit called number is sent as part of the outgoing signaling protocol. |
Calling Number7Digits | When this check box is selected, the 7-digit calling number is sent as part of the outgoing signaling protocol. |
Change Bearer Cap From3_1KHz To Speech | When the check box is selected, the bearer capability of 3.1 kHz received from the ingress is reset to speech for this outgoing Trunk Group. |
Convert Numbers To E164Format | When this check box is selected, numbers are converted to E.164 format. |
Cpc Mapping | When this check box is selected, enables CPC mapping on the associated Trunk Group(s). |
Dialed Number As Called Number | When this check box is selected, the PSX populates the called number (associated with a returned route) with the dialed number. |
Disable Charging Authority For Chosen Carrier | When this check box is selected, the SBC does not delete the ISUP parameters from the ACM and CPG messages, and it allows the CHG message to transit when it is acting as the chosen carrier. |
Discard Calling And Contract Numbers | When this check box is selected, the SBC will not include the calling and contractor numbers in egress signaling when the calling number NOA is Network Specific and the first digit of the calling number is not 0, or the calling number screening is set to User Provided, Verified, and Failed. |
Discard GAPAddl Clg If Same As Clg Number And Ingress SIP | When this check box is selected, for SIP-to-ISUP calls, the SBC does not include the GAP additional calling number in the egress signaling if it is the same as the original calling number. |
Discard Tns And Trunkgroup Owning Carrier Match | When this check box is selected, causes the TNS parameter to be discarded when it matches the Owning Carrier assigned to the egress Trunk Group. |
Dont Strip Clg Number For Restricted Presentation | When this check box is selected, the PSX does not strip (delete) the digits of the calling number for restricted presentation. |
Forced Override Olip Value | When this check box is selected, and there is a value other than none in the Forced OLIP Value field in the ingress section of the Trunk Group to which this signaling profile is applied, the value in that field is copied to the OLI parameter on the egress trunk and sent in the PSX policy response. |
Generate Fe Param | Generate Fe Param |
Oli Mapping | When this check box is selected, enables OLI Parameter mapping on the associated Trunk Group(s). |
Overwrite Charge Information If Chosen IXC | When this check box is selected, the SBC will modify parameters related to charge indication if the value of the Carrier Type parameter determined by the PSX is Chosen IXC. |
Perform Called Party Member Check | When this check box is selected, the PSX checks the called party member status in the subscriber table for the JTI prefix. |
Propagate Charge Message | When this check box is selected, the PSX propagates the CRG messages received on the associated egress Trunk Group from succeeding exchanges to the originating exchange for billing purposes. |
Propagate Gd Param | Controls the propagation of the Generic Digits parameter (switch ID/Trunk Group ID) in the forward direction in the egress IAM. |
Propagate Ingress Channel Info | When this check box is selected, propagate ingress PSTN channel information in the INVITE header sent by a SBC to this SIP Server (via the "chan" parameter in the From: field). |
Reorder Trunk Based On Isup Preference | When this check box is selected, the PSX orders route lists appropriately for calls over ISUP trunks that terminate to a protocol converter for R2 signaling. |
Replace Prefix0With Plus81For Translation Source Number | When this check box is selected and the Translation Source Number has the prefix 0, PSX replaces the prefix 0 with +81. SBC uses this number for SIP signaling. The Translation Source Number without the +81 is recorded in the CDRs. |
Reroute On Signaling Congestion | When this check box is selected, calls on the associated Trunk Group are rerouted to an alternate route. |
Reset Olip For Toll Free Calls | When this check box is selected, the SBC resets the OLIP for toll free calls to the pay phone code. |
Restore Calling Number If Derived From Billing Number | When this check box is selected, the calling number that came in the policy request is sent in the policy response. |
Restore Calling Number If Derived From Redirecting Number | When this check box is selected, and if the PSX derives the calling number from the redirecting number during call processing, the PSX restores the original calling number before sending it in the policy response. |
Restore Calling Number If Derived From Trunk Grp | When this check box is selected, and if the PSX derives the calling number from the default calling number associated with the ingress Trunk Group during call processing, the original calling number is restored before the call is sent out on the egress Trunk Group. |
Restore Fci International Bit | When this check box is selected, the PSX copies the incoming FCI A-bit to the outgoing FCI A-bit. |
Send Billing Number As Clg Number | When this check box is selected, the PSX populates the contents of the billing number over to the calling party parameter. |
Send Billing Number As Clg Number If Clg Number Not Present | When this check box is selected, and if the calling number doesn't exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
Send Calling Number When Not Derived From Input | When this check box is selected, and if the calling number doesn't exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
Send Contract Number If Allowed By Ingress Sip | When this check box is selected and the ingress signaling is SIP, the Contractor Number, if it exists, will be sent in the egress signaling. |
Send Toll Free Number In Gap Param | When this check box is selected, the toll free number will be sent in the Generic Address Parameter (GAP). |
Send Toll Free Number In Ocn Param | When this check box is selected, the toll free number will be sent in the Original Called Number (OCN) parameter. |
Strip Rep Area Code Digits | When this check box is selected, RAC digits are removed from the called party number. |
Transit All Redirection Number NOA | When this check box is selected, the PSX informs the SBC to forward the R-REL transparently to the previous switch regardless of the Nature Of Addresses. |
Undo Lnp | When this check box is selected, SBC undoes LNP on the associated Trunk Group(s). |
Use Output ANIFor CDNIS | When this check box is selected, the Automatic Number Identification (ANI) to be included in the egress signaling will be used for the ANI provisioned in the Custom DNIS DM rule on the associated egress Trunk Group. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools