You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

EdgeMarc 4806 Rear Panel

EdgeMarc 4806 Rear Panel Components

Physical
Label/Type		FunctionDescription
EraseErase buttonPress the Erase button in quick succession to control the following:
  • One click—No action.
  • Two clicks—Resets the CLI password with no service interruption.
  • Three clicks—Restores to factory default settings and reboots the system.
Note: When restored to factory default settings, the current configuration is lost, disconnecting all VoIP devices, Internet connectivity, and network access for computers until the system is reconfigured.
Rear Panel
Power/Status
LEDs		StatusPower
  • Off: Power is not supplied to the device or bootloader failed to load.
  • On: Solid Green—Power is supplied to the unit. VOS is ready.

Status

  • Off—Power is not supplied to the device, or bootloader failed to load.
  • On: Solid Green—Power is supplied to the unit. VOS is ready.
  • Flashing Green—The device is loading the EdgeMarc VoIP Operation System (VOS).
  • Solid Amber—The device is running a self-test and is initializing.
  • Flashing Amber—The device is upgrading its software.
  • Red—The device is in the bootloader. The kernel will change the LED to solid amber once the kernel starts loading.
RJ45 Console
Port		Management1 RJ-45 serial craft console port for management.
Baud: 9600
Data: 8
Parity: N
Stop: 1
Flow Control: NONE
RJ-11 V.92
Modem Port		Management1 x RJ11 for V92 modem access.
Lock NotchPhysical
security		Kensington physical security notch.
Power Module
Tray		Field
replacement		Removable module tray for the 100W 12V DC power supply.
Hole for power
cord strap		SafetySecures the power supply cord.
Input Power
Socket		Accepts 3-pin
shroud female
plug for input
power.		Input Power Socket
On/Off SwitchPowers the
system on
and off.		On/Off Switch
Grounding LugSafetyRefer to Power Surge Protection and Grounding.

  • No labels