Voicemail for Lync Analog Devices

Calls to Lync analog devices

This module employs the Ring No Answer (RNA) action to send unanswered calls to a Lync analog device to Exchange. In effect, this module supplies the ability to leave voicemail for a Lync analog device.

Create Transformation Table

1. Create a Analog Lync Transformation Table. This will be used by the Action Set.

2. Configure the Analog Lync Transformation Table entries. For details, refer to Creating and Modifying Entries to Transformation Tables.

   Create Transformation Table

   InputField Type	Input Field Value	Output Field Type	Output Field Value	Match Type	Example Description
   Called Address/Number	=fmsRTCSIP-Line==	User Value 5	=distinguishedName=	Mandatory	Lync call
   User Value 5	^.*analogEndPoints.*$	User Value 5	^.*analogEndPoints.*$	Mandatory	Analog Endpoints

3. Add distinguishedName to the Cache Attributes.

Create a Route to Lync

1. Create a Transformation Table for Routing to Lync. This will be used by the Call Router. For details, refer to Creating and Modifying Entries to Transformation Tables.

2. Create a Transformation Table Entry to route the call to Lync. If all the numbers have been processed and normalized correctly, you should be able to use the Passthrough Untouched transformation that is created when the Lync Task (wizard) is run.

   Create Transformation Table

   InputField Type	Input Field Value	Output Field Type	Output Field Value	Match Type
   Called Address/Number	(.*)	Called Address/Number	\1	Mandatory

Create a Lync Call Routing Table

1. Create a Lync Call Routing Table. For details, refer to Creating and Modifying Entries to Call Routing Tables.
2. Create a Lync Call Routing entry to point the call to the Lync server. Select the newly created Transformation Table and signaling group. For details, refer to Creating and Modifying Entries to Call Routing Tables.
   

    

Create the Ring No Answer (RNA) Action Set

1. Create the Ring No Answer Action in the Action Configuration menu. For details, refer to Creating and Modifying Entries to Action Set Tables.
2. Add an entry to the main Action Set. Select the Transformation Table and Action on Success.

Send Unanswered Calls to Exchange

If the prior entry exits with a RNA Timeout, then this entry is executed.

1. Create a Transformation Table route to voicemail transformation.This transformation retreives the callee's UMbox, sets the diversion, and sends the call to Exchange.

2. Create the voicemail Transformation Table Entries as below.

   Create Transformation Table

   InputField Type	Input Field Value	Output Field Type	Output Field Value	Match Type	Example Description
   Called Address/Number	==telephoneNumber==	Called Address/Number	msRTCSIP-Line=	Optional	Query the called number against the AD attribute mobile
   Called Address/Number	=mobile==	Called Address/Number	=msRTCSIP-Line=	Optional	Query the called number against the AD attribute telephoneNumber
   Called Address/Number	==msRTCSIP-Line==	Called Address/Number	=msRTCSIP-Line=	Optional	Query the called number against the AD attribute msRTCSIP-Line
   Called Address/Number	\+.*(\d{4})	Redirecting Number	\1	Optional	Trim the returned value to length of the EUM dialplan digits (default 4), place in the Diversion IE.
   User Value 1	(.*)	Called Address/Number	\1	Mandatory	Set the Called Number IE to the EUM SA number (store in UserValue1)

3. Add an entry to the main Action Set to route unanswered Lync analog calls to Exchange voicemail. Select the Transformation Table and Action on Success.