To create or modify an existing SNMP Management Address:
- In the WebUI, click the Settings tab.
In the left navigation pane, go to SNMP/Alarms > SNMP Management Addresses.
SNMP Management Addresses Table
Modifying SNMP Management Addresses
- Click the expand (
) Icon next to the entry you wish to modify. - Edit the entry properties as required, see details below.
Creating SNMP Management Addresses
Click the Create SNMP Manager Address ( 
) icon at the top of the SNMP Management Addresses Table page.
Create SNMP Management Address
SNMP Management Address - Field Definitions
Manager Address
Specifies the SMNP Manager IP Address or Fully Qualified Domain Name (FQDN).
SNMP Version
Specifies the SNMP version.
Community Type
Specifies whether the community is read-only or Read/Write.
USM User name
Username of user's choice.
Auth Protocol
Default = SHA 1.
Auth Password
Password of user's choice.
Confirm Auth Password
Repeat password entered above to confirm.
Priv Protocol
Default is AES 128. Noe: AES 128 must be selected if Auth Protocol is set to anything other than None.
Priv Password
Password of user's choice. Note: Auto hides if Priv Protocol is set to None or version is set to 2.
Confirm Priv Password
Repeat password entered above to confirm.
Trap Enabled
Specifies whether or not the manager accepts traps.
Overview
Content Tools