To create or modify an existing SNMP Management Address:
In the left navigation pane, go to SNMP/Alarms > SNMP Management Addresses.
SNMP Management Addresses Table
Click the Create SNMP Manager Address (
) icon at the top of the SNMP Management Addresses Table page.Create SNMP Management Address
Specifies the SMNP Manager IP Address or Fully Qualified Domain Name (FQDN).
Specifies the SNMP version. Choice of Version 2 or Version 3.
Default is Version 2.
A password used between the SNMP Manager and the agent (SBC Edge).
Hidden when SNMP Version 3 is configured.
Read-Only is the only choice available.
Username of user's choice.
Hidden when SNMP Version 2 is configured.
Default = SHA 1.
Hidden when SNMP Version 2 is configured.
Password of user's choice.
Hidden when SNMP Version 2 is configured.
Repeat password entered above to confirm.
Default is AES 128. Noe: AES 128 must be selected if Auth Protocol is set to anything other than None.
Hidden when SNMP Version 2 is configured.
Password of user's choice.
Hidden when Priv Protocol is set to None or SNMP Version 2 is configured.
Repeat password entered above to confirm.
Specifies whether or not the manager accepts traps.
Default = True.