Page History
...
- To enable VLAN support, click the Network link provided on the VLAN Configuration page.
OR - Choose Network from the Configuration Menu.
Select the Enable VLAN Support check-box checkbox (Figure 3-3) and click Submit.
The system issues the following message:Warning If changing the IP address, it may be necessary to reach the device by using the new IP address. Please verify the accuracy of the IP address to avoid losing the remote connection. Additionally, all voice and video services will be interrupted. Do you want to continue?
Click OK to continue.
The following message is displayed at the top of the Network page: NOTE: VLAN support enabled. Please ensure that the ALG is set to the correct VLAN ID on the VoIP ALG page.Click the VoIP ALG link provided to open the VoIP page or choose VoIP from the Configuration Menu.
Verify your VLAN ID from the ALG LAN using VLAN ID drop-down list.
Choose Network > VLAN.
Configure settings using the table below as a guide. When you have finished configuring settings, click Submit to make your changes take effect.
Caption 0 Table 1 VLAN Configuration Page Parameters Parameter Description VLAN Configuration
View and modify existing VLANs configured on the system.
Create a New VLAN Configures VLAN support. See Creating a New VLAN.
ID VLAN ID Valid range is 2 to 4093 IP Address IP address of the VLAN. Network Mask Network mask of the VLAN.
IPv6 Address Specifies the VLAN IPv6 address. Virtual IP Address
If High Availability is enabled, enter the VLAN virtual IPv4 address. Virtual IPv6 Address
If High Availability is enabled, enter the VLAN virtual IPv6 address. Isolate VLAN from other VLANs
Isolates devices on this VLAN from devices on all other VLANs. This allows the isolation at Layer 2 of devices in the same IP subnet to prevent IP address waste.
You can restrict some ports on the switch to reach only specific ports that have a default gateway or backup server.VLAN Port Membership
Assign ports as members of a VLAN. See Configuring VLAN Port Membership.VLAN Port Configuration Configures VLAN settings per port. If a drop-down list is empty, no VLANs are assigned to that port. To assign a VLAN to the port, go to the VLAN Port Membership page. See Configuring VLAN Ports.
Port Number Specifies the port number. Packet type Selects the packet type. By default, both tagged and untagged packet types are accepted on a port.
Port VLAN ID (PVID) Specifies the port VLAN ID. If a LAN port has multiple VLANs assigned to it, only one of them can be selected as the port's untagged VLAN ID or PVID. By default, a LAN port is assigned to PVID 1.
Note: If a port is configured to accept tagged packets only, PVID selection is not necessary.
Anchor | ||||
---|---|---|---|---|
|
...
Editing a VLAN
Choose Network > VLAN.
In the Create a new VLAN window, select Edit VLAN x from the Action drop-down menu.
Edit settings in the fields provided and click Edit to save your changes
Deleting a VLAN
Choose Network > VLAN.
In the VLAN Configuration table, select the checkbox of the VLAN entry that you want to delete and click Delete. Click OK to confirm.
If a deleted VLAN was previously assigned as the PVID for a port, assign a new PVID to the port on the VLAN Port page. Click VLAN Port and refer to Configuring VLAN Ports.
Anchor | ||||
---|---|---|---|---|
|
The VLAN Configuration page allows you to assign LAN ports as members of a VLAN. If a port is a member of a VLAN, it accepts both tagged and untagged traffic for that VLAN.
Info |
---|
Configure settings on this page before configuring settings in Configuring VLAN Ports. |
- Choose Network > VLAN.
Click VLAN Membership at the top of the VLAN Configuration page to open the VLAN Port Membership page.
Choose a VLAN ID from the VLAN ID drop-down list.
Select the port Member check-boxes that you want to include as members of the selected VLAN. To select all VLANs, click All. To clear checked VLANs, click None.
Click Submit.
Proceed to Configuring VLAN Ports.
Anchor | ||||
---|---|---|---|---|
|
- Choose Network > VLAN.
Click VLAN Port to open the VLAN Port Configuration page.
Configure settings using the information in the table below as a guide. When you have finished configuring settings, click Submit to make your changes take effect.
Caption 0 Table 1 VLAN Configuration Page Parameters Parameter Description Port Number
Configures VLAN settings per port.
Packet Type Configures VLAN packet types on the port. Packet type options vary between
models.Spacevars 0 product2
Choose a packet type for each port from the Packet Type drop-down list:- All: Accepts both tagged and untagged packets on the port.
- Tagged Only: Accepts only VLAN tagged packets on the port and drops untagged packets. The PVID field is disabled.
- Untagged Only: Accepts only untagged packets on the port and drops tagged packets.
PVID Assigns a VLAN ID to the port. If you selected Untagged Only in the Packet Type column, choose a Port VLAN ID from the PVID drop-down list.
The PVID drop-down list contains all member VLANs to which the port belongs. If a drop-down list is empty, no VLANs were assigned to that port. To assign a VLAN to the port, click VLAN Membership and refer to Configuring VLAN Port Membership. If a LAN port has multiple VLANs assigned to it, only one of the VLANs can be selected as the port's untagged VLAN ID. By default, a LAN port is assigned to PVID 1.