...
...
In this section:
...
Use this screen to configure the Response policer. To View and Edit ResponseOn the SBC main screen, go |
...
...
...
> Security Configuration > SIP CAC Profile > Response. Select the desired |
...
SIP CAC Profile from the drop-down list to view its respective Response parameters. The Response window is displayed. |
Figure 1: Security Configuration - Sip Cac Profile -Response
 Image Modified
|
...
...
Response Parameters: Parameter | Length/Range | Description |
|---|
Ingress Aggregate Preference |
|
...
...
RESPONSE within the ingress aggregate policer. |
|
...
The default value is 1. | Ingress Burst Size |
|
...
| 1-10000 | The maximum burst size for ingress |
|
...
RESPONSE. The default value is 1. | Ingress Rate |
|
...
1-1000, or unlimited | The maximum ingress |
|
...
...
...
The default is unlimited. | Ingress Rate Period |
|
...
| 1-10 | The time period (in seconds) over which ingress |
|
...
...
The default value is 1 second. | Egress Aggregate Preference |
|
...
...
...
RESPONSE within the egress aggregate policer. |
|
...
The default value is 1. | Egress Burst Size |
|
...
...
maximum burst size for egress |
|
...
...
The default value is 1. | Egress Rate |
|
...
| 1-1000, or unlimited | The maximum egress |
|
...
RESPONSE rate in aggregate messages per period. |
|
...
The default is unlimited. | Egress Rate Period |
|
...
1-10 | The time period (in seconds) over which egress |
|
...
...
The default value is 1 second. |
Make the required changes and |
...