SIP CAC Profile - Response

Use this screen to configure the Response policer.

To View and Edit Response

On the SBC main screen, go to Configuration > System Provisioning > Security Configuration > SIP CAC Profile > Response.

Select the desired SIP CAC Profile from the drop-down list to view its respective Response parameters.

The Response window is displayed.

Response Parameters:

Parameter	Length/Range	Description
Ingress Aggregate Preference	1-10	The preference for RESPONSE within the ingress aggregate policer. The default value is 1.
Ingress Burst Size	1-10000	The maximum burst size for ingress RESPONSE. The default value is 1.
Ingress Rate	1-1000, or unlimited	The maximum ingress RESPONSE rate in RESPONSE per period. The default is unlimited.
Ingress Rate Period	1-10	The time period (in seconds) over which ingress RESPONSE rate applies. The default value is 1 second.
Egress Aggregate Preference	1-10	The preference for RESPONSE within the egress aggregate policer. The default value is 1.
Egress Burst Size	1-1000	The maximum burst size for egress RESPONSE. The default value is 1.
Egress Rate	1-1000, or unlimited	The maximum egress RESPONSE rate in aggregate messages per period. The default is unlimited.
Egress Rate Period	1-10	The time period (in seconds) over which egress RESPONSE rate applies. The default value is 1 second.

Make the required changes and click Save.