Page History
...
By upgrading the software of an SBC SWe Edge HA pair through the Settings tab, you manually perform most of the upgrade steps, such as uploading the software image to the Active instance, checking the last upload status, and setting the inactive partition to the active partition. For more information on inactive and active partitions, refer to: Working with System Software. The following workflow defines the procedures for upgrading the software of an SBC SWe Edge HA Pair through the Settings Tab.
...
Step | Action |
---|---|
1 | Upgrade the Software of an SBC SWe Edge HA Pair#Uploading Uploading a Software Image to the Active Instance |
2 | Setting an Inactive Partition to an Active Partition |
...
Before you begin, make sure:
- you have completed Upgrade the Software of an SBC SWe Edge HA Pair#Uploading Uploading a Software Image to the Active Instance.
the Last Upload Status in the Partitions Table pane shows Success for both the Active and the Standby instances.
Info title Note - The Active instance lists the details of the partitions of both the Active and the Standby instances.
- The Standby instance only lists the details of its own partitions.
...
Overview
Content Tools