Page History
...
To view UDP parameters, log on as "Calea" user. For more information, refer to Users and Application Management - User and Session Management.
On the SBC main screen, navigate to Configuration > Intercept > Call Data Channel > Mediation Server > Media > UDP.
| Note |
|---|
UDP is supported only for PCSI and IMS LI configurations. Refer Refer to Intercept Flavors and Configuration Details for configuration details. |
You can configure UDP can be configured for each Mediation Server under each Call Data Channel and default Address Context. Use the drop-down box to select the default Address Context, Call Data Channel, and Mediation Server
...
| 0 | Figure |
|---|---|
| 1 | UDP Main Field |
.
...
The UDP window is displayed.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
The following fields are displayed:
...
| 0 | Table |
|---|---|
| 1 | TCP Parameters |
...
UDP Parameters:
Parameter | Length/Range | Description |
|---|---|---|
| IP Address V4 or |
...
| V6 | N/A | IPv4/IPv6 |
...
address of the mediation server for media interception over UDP. |
| Port |
...
| Number | 0-65535 | Specifies the port number of the mediation server for media interception over UDP. |
...
Dscp Value | 0-63 | Specifies the DSCP value for intercepted media packets sent on UDP port. |
...
The default value is 16 |
...
. | ||
Mode | N/A | Specifies the mode of the UDP connection towards the mediation server for media interception. |
...
|
...
| ||
State | N/A | Specifies the state of the UDP connection towards the mediation server for media interception. |
...
|
Click Save to save the configuration.
Overview
Content Tools