Versions Compared

Old Version 3

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To View and Edit Aggregate Message

On the SBC main screen, go to Configuration > System Provisioning > Security Configuration >Sip Cac SIP CAC Profile > Aggregate Message.

Select the desired Sip Cac SIP CAC Profile from the drop-down list to view its Aggregate Message parameters.

...

Aggregate Message Parameters:

Parameter

Length/Range

Description

Ingress Burst
Size

1-10000

Specifies the maximum burst size for ingress aggregate message.

The value ranges from 1 - 10000. The default value is Default = 10.

Ingress Rate

1-1000, or unlimited

Specifies the maximum ingress aggregate message rate in aggregate messages per period.

The value range from 1 - 1000 or default is unlimited.

Ingress Rate
Period

1-10

Specifies the time period (in seconds) over which ingress aggregate message rate applies.

The value ranges from 1 - 10 seconds.Default = 1

Egress Burst
Size

1-1000

Specifies the maximum burst size for egress aggregate messages.

The value ranges from 1 - 1000. The default value is Default = 10.

Egress Rate

1-1000, or unlimited

Specifies the maximum egress aggregate message rate in aggregate messages per period.

The value ranges from 1 - 1000 or default is unlimited.

Egress Rate
Period

1-10

Specifies the time period (in seconds) over which egress aggregate message rate applies.

The value ranges from 1 - 10 seconds.Default = 1

Make the required changes and click Save.

...