Use this screen to configure the Aggregate Message policer.

To View and Edit Aggregate Message

On the SBC main screen, go to Configuration > System Provisioning > Security Configuration > SIP CAC Profile > Aggregate Message.

Select the desired SIP CAC Profile from the drop-down list to view its Aggregate Message parameters.

The Aggregate Message window is displayed.


Aggregate Message Parameters:

Parameter

Length/Range

Description

Ingress Burst
Size

1-10000

Specifies the maximum burst size for ingress aggregate message.

Default = 10.

Ingress Rate

1-1000, or unlimited

Specifies the maximum ingress aggregate message rate in aggregate messages per period.

The default is unlimited.

Ingress Rate
Period

1-10

Specifies the time period (in seconds) over which ingress aggregate message rate applies.

Default = 1

Egress Burst
Size

1-1000

Specifies the maximum burst size for egress aggregate messages.

Default = 10.

Egress Rate

1-1000, or unlimited

Specifies the maximum egress aggregate message rate in aggregate messages per period.

The default is unlimited.

Egress Rate
Period

1-10

Specifies the time period (in seconds) over which egress aggregate message rate applies.

Default = 1

Make the required changes and click Save.


  • No labels