Page History
Add_workflow_for_techpubs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Panel | |
---|---|
In this section:
|
...
On the Device Overview page under the ACTIONS menu, select Apply Collection Policy.
Caption 0 Figure 1 Apply collection policy You are prompted to confirm this action.
Select CONTINUE to apply to the new policy changes to the device.
...
On the Device Overview page under the ACTIONS menu, select Configure Device.
Caption 0 Figure 1 Configure Device The Configure Devices page appears.
Caption 0 Figure 1 Configure Device Info title Note To push new configurations to an
300 series device, the only option available is Click to select a file or drag it here option. Configure Parameters option is not available forSpacevars 0 product3
300 series devices.Spacevars 0 product3 Info title Note For
300 series devices, the Bulk Configuration action requires all the selected devices to beSpacevars 0 product3
300 devices. All theSpacevars 0 product3
300 series devices get listed under Excluded Devices when included with other devices for Bulk Configuration.Spacevars 0 product3 Make the necessary configuration changes.
Tip title Tip You can also push a complete configuration from
15 or higher to anSpacevars 0 product
. Select Click to select a file or drag it here to push new configurations to anSpacevars 0 product3
.Spacevars 0 product3 Tip title Tip Refer to Configuring Parameter Values for details with configuring parameter values.
- Schedule when to configure your device by selecting Perform Now or Perform Later. If you decide to perform the configuration later, enter the following details:
- Schedule Name – Enter a schedule name of your choice.
- Date and Time – Enter the date and time when the configuration is to be performed.
Time Zone – Choose whether time is to be calculated based on Local Time Zone or UTC.
Once you make the necessary changes, select CONFIGURE 1 DEVICE. You are prompted to confirm configuration changes.
- Select CONFIGURE NOW to configure the selected device.
...
On the Device Overview page under the ACTIONS menu, select Configure SD-WAN.
The Configure SD-WAN page appears.
Make the necessary configuration changes and then select CONFIGURE SD-WAN ON 1 DEVICE to save the changes.
Tip | ||
---|---|---|
| ||
For more details on configuring SD-WAN, refer to Deploying SD-WAN on EdgeMarc Device. |
Configure VLAN
Info | ||
---|---|---|
| ||
Configure VLAN is not active for EdgeMarc 300 Series devices as they are ATA devices. |
To perform VLAN configuration, follow the steps given below:
On the Device Overview page under the ACTIONS menu, select Configure VLAN.
Caption 0 Figure 1 Actions Menu The Configure VLAN page appears.
Caption 0 Figure 1 Configure VLAN - Click ADD to add a new VLAN
Caption | ||||
---|---|---|---|---|
| ||||
The PORT VLAN dropdownin the VLAN Ports table will be updated whenever a VLAN is edited, or new VLAN is added to reflect the members.
Caption | ||||
---|---|---|---|---|
| ||||
Configure PoE
Info | ||
---|---|---|
| ||
This action is available only for Power over Ethernet (PoE) devices. |
...
On the Device Overview page under the ACTIONS menu, select Open Device GUI.
A new browser tab opens.
Info title Note
does not support multiple concurrent sessions of Open Device GUI.Spacevars 0 product
...
On the Device Overview page under the ACTIONS menu, select Upgrade Firmware.
The Upgrade Firmware page appears.
Under the Included Devices table, select the firmware version to which you want to upgrade the device.
Tip title Tip Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
- Schedule when to upgrade your firmware by selecting Perform Now or Perform Later. If you decide to perform the upgrade later, enter the following details:
- Schedule Name – Enter a schedule name of your choice.
- Date and Time – Enter the date and time when the upgrade is to be performed.
Time Zone – Choose whether time is to be calculated based on Local Time Zone or UTC.
Click UPGRADE 1 DEVICE. You are prompted to confirm the upgrade.
- Select UPGRADE NOW to upgrade the selected device.
...
On the Device Overview page under the ACTIONS menu, select Edit Device.
The Edit Device dialog box appears.
- Edit the Name and Description and click SAVE.
...
On the Device Overview page under the ACTIONS menu, select Move to Collection.
The Move to Collection page appears.
Choose the collection to which you want to move the selected device.
Tip title Tip Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
- Select MOVE 1 DEVICE once you chose a collection.
...
On the Device Overview page under the ACTIONS menu, select Delete Device.
The Delete Devices page appears.
Select DELETE 1 DEVICE to delete the device. You are prompted to confirm the deletion.
- Select DELETE NOW to delete the selected device.
PURGE DEVICE
Purge Device removes a device from EdgeView. A new simple configuration will be pushed to the device to reset the EMPath Management Server so that the device will not attempt to re-register with the EdgeView it is being purged from. All data related to the device will be purged from EdgeView.
To perform Purge Device, follow the steps given below:
a. On the Device Overview page under the ACTIONS menu, select Purge Device.
Caption | ||||
---|---|---|---|---|
| ||||
b. The Purge Device page appears. Click on the Purge 1 Device button to purge the device.
Caption | ||||
---|---|---|---|---|
| ||||
Run Health Report
Info | ||||
---|---|---|---|---|
| ||||
Run Health Report is not active for
|
...
On the Device Overview page under the ACTIONS menu, select Run Health Report.
The Run Health Report page appears.
Select RUN HEALTH REPORT FOR 1 DEVICE to run health reports. You are prompted to confirm the health report run.
Click RUN HEALTH REPORT NOW to run the health report.
...
On the Device Overview page under the ACTIONS menu, select Backup Configuration.
Caption 0 Figure 1 Backup configuration The Backup Configuration page appears.
Tip title Tip Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Select BACKUP 1 DEVICE to backup your device. You are prompted to confirm backup.
- Select BACKUP NOW to backup the selected device.
...
On the Device Overview page under the ACTIONS menu, select Restore Configuration.
The Restore Configuration page appears.
In the Included Devices table, choose the backup point to which you want to restore the device.
Tip title Tip Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Select RESTORE 1 DEVICE to backup your device. You are prompted to confirm the restore operation.
- Select RESTORE NOW to restore the selected device.
...
On the Device Overview page under the ACTIONS menu, select Change Passwords.
The Change Passwords page appears.
You can change one or all of the following fields:
- Root Password
- GUI User Root
- GUI User Rouser
Select Set all as and then Root Password, GUI User Root and/or GUI User Rouser.
Info title Note The password must contain alphanumeric and special characters and should be 6 to 8 characters in length.
Once you make the necessary changes, click CHANGE PASSWORD FOR 1 DEVICE. You are prompted to confirm the password change.
- Select CHANGE PASSWORD NOW to change the password(s) of the selected device.
...
On the Device Overview page under the ACTIONS menu, select Reboot.
The Reboot Devices page appears.
Tip title Tip Enable the Send notification once Upgrade is completed check-box if you want to receive notifications.
Click REBOOT 1 DEVICE. You are prompted to confirm the reboot.
- Click REBOOT NOW to reboot the selected device.
...