Page History
add_docset_workflow | APPRJID | SYM-19284|||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
workflow_for_techpubs | ||||||||||||||||
|
Panel | ||||
---|---|---|---|---|
In this section:
|
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the IP address mode that is assigned for the interface used by the ASM. Choices are IPv4 or IPv4 and IPv6. Depending on the mode selected, specific configuration fields are displayed; these are noted where applicable. When the IPv4 and IPv6 option is selected, IPv4 and IPv6 configuration is available.
|
DHCPv4 Enabled
Panel | ||||
---|---|---|---|---|
| ||||
Specifies whether DHCPv4 is enabled on the interface through which the ASM communicates. When this field is set to No, the IP configuration fields are displayed. |
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the primary IPv6 address for the port through which the ASM communicates. This entry is in a colon-hex notation (i.e., 2001:db8:10::100). Note: In order to configure IPv6 on the ASM, the ASM must be running Windows Server 2012R22019. Field is displayed only when DHCPv4 Enabled for Network Adapter 1 is set to No. |
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the IP address mode that is assigned for the interface used by the ASM. Choices are IPv4, IPv6 or IPv4 and IPv6. Depending on the mode selected, specific configuration fields are displayed; these are noted where applicable. When the IPv4 and IPv6 option is selected, both IPv4 and IPv6 configuration is available.
|
DHCP Enabled
Panel | ||||
---|---|---|---|---|
| ||||
Specifies whether DHCP is enabled on the interface through which the ASM communicates. When this field is set to No, the IP configuration fields are displayed. |
...
Panel | ||||
---|---|---|---|---|
| ||||
Specifies the primary IPv6 address for the port through which the ASM communicates. This entry is in a colon-hex notation (i.e., 2001:db8:10::100). Note: In order to configure IPv6 on the ASM, the ASM must be running Windows Server 2012R22019. Field is displayed only when DHCPv4 Enabled for Network Adapter 2 is set to No and IP addressing Mode is set to IPv6 or IPv4 and IPv6. |
...