Page History

Include Page
UXDOC120:Not_for_SWeUXDOC120: Not_for_SWe

This section describes how to configure the DS1 port types (T1/E1) on the 

Spacevars
0 longproduct

system. Using this feature sets the DS1 ports on the 

Spacevars
0 longproduct

to either T1 or E1. In most geographical area only T1 or E1 is available. However, in some countries both are available and the SBC may be required to support both simultaneously. 

...

T1/E1 ports on the SBC 2000 are provided via removable T1/E1 PSTN Interface cards. The SBC 2000 supports up to two T1/E1 PSTN Interface cards with a maximum of 16 physical T1/E1 ports. The T1/E1 PSTN Interface cards are available with 8 T1/E1 ports licensed individually. Each SBC 2000 T1/E1 PSTN Interface Card provides two four-port spans, each span is individually configurable as either T1 or E1.

...

1. Click the Set DS1 Port Type text at the top of the Port Table View page.
   
   DS1 Port Types - SBC 2000

   

   
   DS1 Port Types - SBC 1000
   

   

   
   

2. Select either T1 or E1 from the ports menu(s).
3. Click OK.