Versions Compared

Old Version 2

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Panel

In this section:

Table of Contents
maxLevel3

  Include PageNot_Applicable_to_CloudNative


Not_Applicable_to_CloudNative

Accessing the Static IPv6 Neighbor Table

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to Protocols > IPv6 > Static Neighbor. 

    Anchor
    Static IPv6 Route Table
    Static IPv6 Route Table


Creating an Entry in a Static IPv6 Neighbor Table

  1. From the Static IPv6 Neighbor Table, click the Create Static IPv6 Neighbor Entry ( ) icon at the top.

  2. Configure the options. See field definitions.

  3. Click OK. 

    Anchor
    Create Static IPv6 Route Entry
    Create Static IPv6 Route Entry



    Anchor
    properties
    properties

Static IPv6 Neighbor Table - Field Definitions

IPv6 Address

Panel
bgColor#FAFAFA
borderStylenone

Specifies the IPv6 address of the destination host or subnet (2001:db8:10::200). This address is used to manually map IPv6 addresses to link-layer addresses.

MAC Address

Panel
bgColor#FAFAFA
borderStylenone

Specifies the MAC address of the destination host or subnet (i.e., 00:01:02:04:08:10). This address is used to manually map IPv6 addresses to link-layer addresses.

Interface

Panel
bgColor#FAFAFA
borderStylenone

The interface name for this Neighbor entry. This interface is used to map IPv6 address to link-layer addresses. This drop down is populated with each Logical Interface interface configured, which includes both the IPv6 address and IPv6 Link-Local options.