In this section:


Accessing the Static IPv6 Neighbor Table

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to Protocols > IPv6 > Static Neighbor. 

Creating an Entry in a Static IPv6 Neighbor Table

  1. From the Static IPv6 Neighbor Table, click the Create Static IPv6 Neighbor Entry ( ) icon at the top.

  2. Configure the options. See field definitions.

  3. Click OK. 



Static IPv6 Neighbor Table - Field Definitions

IPv6 Address

Specifies the IPv6 address of the destination host or subnet (2001:db8:10::200). This address is used to manually map IPv6 addresses to link-layer addresses.

MAC Address

Specifies the MAC address of the destination host or subnet (i.e., 00:01:02:04:08:10). This address is used to manually map IPv6 addresses to link-layer addresses.

Interface

The interface name for this Neighbor entry. This interface is used to map IPv6 address to link-layer addresses. This drop down is populated with each Logical Interface interface configured, which includes both the IPv6 address and IPv6 Link-Local options.