Page History

Use this procedure to change the management IP addresses on

In following example, all four management IP addresses are changed for an

1. Login to CLI, and check current status of management interfaces:

   Code Block
   language none
   > show table system mgmtIpInterfaceGroup mgmtIpInterface IP CE PORT IP ADDRESS PREFIX ADDRESS PREFIX RX TX NAME NAME NAME NAME V4 V4 V6 V6 STATE NAME OPER STATUS IFINDEX PACKETS PACKETS ------------------------------------------------------------------------------------------------------------------------------------------- mgmtGroup mgmtIntf1 MYSBXA mgt0 10.10.10.111 26 - - enabled mgmtIntf2 MYSBXA mgt1 10.10 11.111 26 - - enabled mgmtIntf3 MYSBXB mgt0 10.11.12.111 26 - - enabled mgmtIntf4 MYSBXB mgt1 10.11.13.111 26 - - enabled mgmtIntf1 resourceAllocated 5 8301 1198618 mgmtIntf2 resourceAllocated 6 3181 6 mgmtIntf3 resourceAllocated 7 8643 1609601 mgmtIntf4 resourceAllocated 8 3185 6

   
   

2. From Configure mode, disable mgmtIntf3 on

   Spacevars
   0 product

   'B' server (secondary server):

   Code Block
   language none
   > configure % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf3 ceName MYSBXB state disabled % commit

   
   

3. Change IP address of mgmtIntf3 on secondary

   Spacevars
   0 product

   :

   1. Change IP address:

      Code Block
      language none
      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf3 ceName MYSBXB ipAddressV4 10.11.22.111 prefixV4 26 % commit

      
      

   2. Verify change:

      Pagebreak

      Code Block
      language none
      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf3 mgmtIpInterfaceGroup mgmtGroup { mgmtIpInterface mgmtIntf3 { ceName MYSBXB; portName mgt0; ipAddressV4 10.11.22.111; prefixV4 26; state disabled; } }

      
      

4. Enable mgmtIntf3 on secondary

   Spacevars
   0 product

   :

   1. Enable mgmtIntf3

      Code Block
      language none
      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf3 ceName MYSBXB state enabled

      
      

   2. Verify change:

      Code Block
      language none
      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf3 mgmtIpInterfaceGroup mgmtGroup { mgmtIpInterface mgmtIntf3 { ceName MYSBXB; portName mgt0; ipAddressV4 10.11.22.111; prefixV4 26; state enabled; } }

      
      

5. Disable mgmtIntf4 on secondary

   Spacevars
   0 product

   :

   Code Block
   language none
   % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf4 ceName MYSBXB state disabled % commit

   
   

6. Change IP address of mgmtIntf4 on secondary

   Spacevars
   0 product

   :

   1. Change IP address:

      Code Block
      language none
      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf4 ceName MYSBXB ipAddressV4 10.11.32.111 prefixV4 26 % commit

      
      

   2. Verify change:

      Code Block
      language none
      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf4 mgmtIpInterfaceGroup mgmtGroup { mgmtIpInterface mgmtIntf4 { ceName MYSBXB; portName mgt1; ipAddressV4 10.11.32.111; prefixV4 26; state disabled; } }

      
      

7. Enable mgmtIntf4 on secondary 

   Spacevars
   0 product

   1. Enable mgmtIntf4:

      Code Block
      language none
      % set system mgmtIpInterfaceGroup mgmtGroup mgmtIpInterface mgmtIntf4 ceName MYSBXB state enabled % commit

      
      

   2. Verify change:

      Code Block
      language none
      % show system mgmtIpInterfaceGroup mgmtIpInterface mgmtIntf4 mgmtIpInterfaceGroup mgmtGroup { mgmtIpInterface mgmtIntf4 { ceName MYSBXB; portName mgt1; ipAddressV4 10.11.32.111; prefixV4 26; state enabled; } }

      
      

8. Exit to system-level mode.

   Code Block
   % exit

   
   

9. Perform a switchover:

   Code Block
   language none
   > request system admin MYSBX switchover

   
   

10. Perform a syncStatus command to confirm primary and secondary servers have synced.

    Code Block
    language none
    > show table system syncStatus SYNC MODULE STATUS --------------------------------------- Policy Data syncCompleted Disk Mirroring syncCompleted Configuration Data syncCompleted Call/Registration Data syncCompleted

    
    

11. Repeat steps 1-7 for mgmtIntf1 and mgmtIntf2 on the

    Spacevars
    0 product

    'A' server.