Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

For the single endpoint configuration, since the peer end if not known/configured, in the Easy Configuration Wizard, the Transformation and Routing entries for the endpoint being configured are created independent of the peer end. If you have two endpoints connected and use the Single Leg Wizard to add the third endpoint, you'll need to create/modify the Transformation and Routing entries to complete routing.

For instructions on configuring multi-legged call routing (3rd, 4th or 5th peer to an SBC, refer to Multi-Legged Call Routing for Dummies.

Info
titleEasy Configuration Wizard - Single Leg Configuration Notes
For instructions on configuring multi-legged call routing (3rd, 4th or 5th peer to an SBC, refer to Multi-Legged Call Routing for Dummies
  • A single leg wizard should be used to add a 3rd, 4th, 5th peer to device, when at least 2 legs have already been configuring via the standard Easy Configuration Wizard.
  • Emergency configuration is not supported for single end scenarios.
Info
  • .

Step 1: Select IP PBX

Easy Configuration Step 1 includes configuration for scenario parameters. 

...