Versions Compared

Old Version 12

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

About this Resource

Available_since
Type Available Since
Release3.1.0
Excerpt

Defines a Threshold Crossing Alert defined in the SBC.

Info

The TCAs are pre-defined in the system and are disabled by default. They need to be enabled, if needed, and configured according to the system specifications.

Tip

These TCAs raise alarms when the conditions they are monitoring go over the configured threshold. Consequently, the alarm is cleared when the condition goes below the clearing threshold.

REST API Methods for this Resource

Resource Schema

Configuration

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
ConfigIEStateNoYesEnum1Possible values:
  • 0 - esDISABLED
  • 1 - esENABLED
Specifies the Administrative State of the resource.
StatisticYesNoEnum1Possible values:
  • 0 - tcasUnused
  • 1 - tcasSignalingGroup
  • 2 - tcasLicense
  • 3 - tcasSIPRegistration
  • 4 - tcasDSP
  • 5 - tcasCPU
  • 6 - tcasMemory
  • 7 - tcasTotalFDInUse
  • 8 - tcasCPULoadAverage1m
  • 9 - tcasCPULoadAverage5m
  • 10 - tcasCPULoadAverage15m
  • 11 - tcasTmpPartUsage
  • 12 - tcasLogginPartUsage
Specifies the type of statistic this TCA is for.
RaiseThresholdYesNoint100Specifies the threshold at which an alarm is raised for this TCA.
Note

The default and possible values may vary with the type of statistic being collected.

ClearThresholdYesNoint90Specifies the threshold at which an alarm is cleared for this TCA.
Note

The default and possible values may vary with the type of statistic being collected.