| CSS Stylesheet |
|---|
img.confluence-embedded-image { display: inline-block !important; } |
| Add_workflow_for_techpubs |
|---|
| AUTH1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'} |
|---|
| JIRAIDAUTH | SYM-2220627506 |
|---|
| REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV6 | REV3 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV3 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'} |
|---|
| REV1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'} | REV1 |
|---|
|
| Tip |
|---|
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000. |
| Info |
|---|
SBC Easy Configuration supports IPv4 only, not IPv6. |
The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync VoIP environment with a SIP Trunk Provider to an IP phone. The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATT &T IP Flexible ReachSIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other Generic SIP Trunk
- Verizon Managed Service
- SoftBank White Office
- Telstra Enterprise SIP Connect
- Verizon KDDI SIP Trunk
- Broadsoft Trunk
| Note |
|---|
NTT DOCOMO Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
| Note |
|---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
...
| Note |
|---|
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard. |
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario - Field Definitions
...
...
...
...
...
...
|
 Image Added
|
Scenario Parameters
Application
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
|
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enter the name to describe the SIP Trunk ↔ IP Phone setup. | Info |
|---|
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment. |
|
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines This field defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below. Options: ELIN Identifier, E911/E112 or None. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
Name (SIP Trunk)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP trunk used for connection to the IP phones. Valid options: Generic ATT SIP Trunk, AT&T IP Flexible Reach Other SIP Trunk, Verizon Managed ServiceSIP Trunk, KDDI SIP Trunk and, Broadsoft Trunk, SoftBank White Office, and NTT DOCOMO Officelink. The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP Phone Registrar. This field is fixed. |
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
...
...
...
These fields apply if you selected Generic AT&T SIP Trunk in in Step 1 - Select Scenario.
...
...
...
 Image Added
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
Secondary Border Element Server
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
Enables/disables support for the AT&T Simulataneous Ring feature. Valid option: Yes or No. |
AT&T IP Toll Free
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
...
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
IP Toll Free Access Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and Selects the IP phone . Default entry: 5060. |
...
numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides.Netmask. The network mask of Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (  Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
...
 Image Added
|
...
...
Back to top
...
KDDI SIP Trunk - Field Definitions
...
These fields apply if you selected AT&T IP Flexible Reach in KDDI SIP Trunk in Step 1 - Select Scenario.
...
...
...
| KDDI SIP Trunk | | 3 | KDDI SIP Trunk |
|---|
|
 Image Added
|
...
...
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The FQDN or IP address of the Session Border Controller service provider. |
Protocol
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
Port Number
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
Main Telephone Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
...
The main telephone number associated with the SIP trunk. |
Called Prefix (FMC Service)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Used for setting up transformation rules for the FMC service.
|
Address of Record URI (Contact Registrant Entry)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Address of Record of the client that is registered on the SIP server.
|
Static Host (SIP Profile)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID (Remote Authorization Entry)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
...
| The user identification to use in authentication. |
Enter Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
...
| The password to use when authenticating with the user ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
...
| Re-enter the password to use with authentication for confirmation. |
DNS Server IP (Split DNS Table)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
...
| IP address (IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks. |
Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Protocol used for communicating Domain name associated with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Add Split DNS Entry |
|---|
|
|
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan (IP Phone Registrar)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
| Image Removed |
|
Verizon Managed Service - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Verizon Managed Service |
|---|
| Image Removed |
|
|
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP. |
...
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. For SIP Registrar, refer to |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. |
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
| Note |
|---|
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines. |
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | NTT DOCOMO Officelink Trunk |
|---|
|
 Image Added |
Office Link FOMA-R
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Host IP address of the SIP Server. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
...
| The SIP Server Port number used for sending and receiving SIP messages between the SBC and the SIP Server. Default value: 5062. |
CUG Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and Defines the IP phone . Default entry: 5060. |
...
numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
| Image Removed |
|
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
...
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. - Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the (  Image Added) icon. Enter the Network IP and Network Mask and click OK. |
...
...
...
|
Image Added |
Other SIP Trunk - Field Definitions
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
| Caption |
|---|
|
 Image Added
|
Border Element Server
...
Image Removed
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The FQDN or IP address of the Session Border Controller the Remote Peer service provider. |
...
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 the and the Border Element Server. Valid entry UDP or TCP. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 the and the Border Element Server. |
...
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Used for setting up transformation rules for the FMC service.
|
...
Enables or disables the secondary Remote Peer service provider configured. |
Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Address of Record of the client that is registered on the SIP server.
|
...
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Address of Static Host The Protocol used for communicating with the Secondary Border Element Server. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies a user name to use in response to a challenge.
|
...
entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between the and the Secondary Border Element server. Default entry: 5060. This field is available only when Use Secondary Border Element Server is Enabled. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between the and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP: IP address for the destination host or subnet in which the IP phone resides. Netmask: The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
Image Added |
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | SoftBank White Office |
|---|
|
 Image Added
|
WAN Link
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Signaling/Media Source IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The host IP address or FQDN for the SIP server. |
Gateway ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The ID used for authenticating with the router at the gateway of the network. |
Gateway Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password used for authenticating with the router at the gateway of the network. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Re-entry of the password for the router serving as the network gateway. |
Address of Record URI
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
Image Added |
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Telstra Enterprise SIP Connect Trunk |
|---|
|
 Image Added
|
NAT Public Interface
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The public interface used for Network Address Translation (NAT). |
State
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Protocol and Port
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The User ID for use in authentication. |
Authentication Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password to use when authenticating with the User ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The re-entered password for confirmation. |
Trunk Pilot Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Added |
|
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Verizon SIP Trunk |
|---|
|
 Image Added
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password for the Authentication ID. |
...
FQDN or IP address of the Remote Peer service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Re-enter the password for the Authentication ID.
|
DNS Server IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
| Domain name associated with the DNS IP address.
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define Define the number of users. Valid entry 1 - 1000. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image RemovedImage Added) icon. Enter the Network IP and Network Mask and click OK. |
...
Image Added |
...
...
Broadsoft Trunk - Field Definitions
...
...
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
...
...
...
 Image Added |
Server Domain
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN of the server domain. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
...
Image Removed
...
Image Added |
Step 3 - Confirm and Submit Configuration
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
...
This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.
...
...
| Caption |
|---|
|
 Image Added
|
...
