...
| Add_workflow_for_techpubs |
|---|
| AUTH1 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| JIRAIDAUTH | SYM-2220619713 |
|---|
| REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV6 | REV3 | REV1 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV3 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd700a1f, userName='null'} |
|---|
| REV4 | UserResourceIdentifier{userKey=8a00a0c85c46b657015d4f57d577001c, userName='null'} |
|---|
| REV1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c7ca0038, userName='null'} |
|---|
|
| Tip |
|---|
Usage of the Easy Config wizard to configure the (SBC) |
| Tip |
|---|
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000. |
info |
SBC Easy Configuration supports IPv4 only, not IPv6. |
The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone. The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATT &T IP Flexible ReachSIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other Generic SIP Trunk
- Verizon Managed Service
- SoftBank White Office
- Telstra Enterprise SIP Connect
- Verizon KDDI SIP Trunk
- Broadsoft Trunk
| Note |
|---|
NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
| Note |
|---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
...
Scenario - Field Definitions
...
...
...
...
...
|
 Image Added
|
...
Application
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
|
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enter the name to describe the SIP Trunk ↔ IP Phone setup. | Info |
|---|
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment. |
|
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines This field defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below. Options: ELIN Identifier, E911/E112 or None. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP trunk used for connection to the IP phones. Valid options: Generic ATT SIP Trunk, AT&T IP Flexible Reach Other SIP Trunk, Verizon Managed ServiceSIP Trunk, KDDI SIP Trunk and, Broadsoft Trunk, SoftBank White Office, and NTT DOCOMO Officelink. The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP Phone Registrar. This field is fixed. |
| Noprint |
|---|
Back to top
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
...
These fields apply if you selected Generic SIP Trunk in AT&T IP Flexible Reach in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Generic SIP Trunk | AT&T IP Flexible Reach |
|---|
|  Image Added
 Image Removed
|
|
|
|
Border Element Server
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
AT&T IP Toll Free
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
...
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
IP Toll Free Access Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and Selects the IP phone . Default entry: 5060. |
...
numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network To create a network address, click the (  Image Removed  Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
| Image Removed Image Added |
|
...
KDDI SIP Trunk - Field Definitions
These fields apply if you selected AT&T IP Flexible Reach in KDDI SIP Trunk in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | AT&T IP Flexible Reach | KDDI SIP Trunk |
|---|
| 3 | KDDI SIP Trunk |
|---|
|  Image AddedImage Removed
|
|
|
|
...
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The FQDN or IP address of the Session Border Controller service provider. |
Protocol
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
Port Number
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
Called Prefix
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
...
Used for setting up transformation rules for the FMC service.
|
Address of Record URI
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Address of Record of the client that is registered on the SIP server.
|
Static Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Specifies a user name to use in response to a challenge.
|
Enter Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The password for the Authentication ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
...
Re-enter the password for the Authentication ID.
|
DNS Server IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
...
| IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled Domain name associated with the DNS IP address. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define Define the number of users. Valid entry 1 - 1000. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
| Image RemovedImage Added |
|
...
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected Verizon Managed Service in NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
...
...
| Note |
|---|
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines. |
...
Image Removed
...
| NTT DOCOMO Officelink Trunk |
|
 Image Added |
Office Link FOMA-R
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN or Host IP address of the Session Border Controller service providerSIP Server. |
Protocol
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element SIP Server. This Default value is fixed at : UDP. |
Port
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The SIP Server Port number used for sending and receiving SIP messages between Sonus the SBC 1000/2000 and the Border Element and the SIP Server. Default value: 5062. |
CUG Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN of the SIP Server. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phone residesphones reside. - Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
| Image Removed |
|
...
Image Added |
|
Other SIP Trunk - Field Definitions
These fields apply if you selected KDDI Generic SIP Trunk in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | KDDI Other SIP Trunk |
|---|
| 3 | KDDI SIP Trunk |
|---|
| Image Removed |
|
|
|
...
 Image Added
|
|
|
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Used for setting up transformation rules for the FMC service.
|
...
Enables or disables the secondary Session Border Controller service provider configured. |
Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Address of Record of the client that is registered on the SIP server.
|
Static Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies a user name to use in response to a challenge.
|
Enter Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The password for the Authentication ID. |
...
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number (Secondary Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Added |
|
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | SoftBank White Office |
|---|
|
 Image Added
|
WAN Link
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Signaling/Media Source IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The host IP address or FQDN for the SIP server. |
Gateway ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The ID used for authenticating with the router at the gateway of the network. |
Gateway Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password used for authenticating with the router at the gateway of the network. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Re-entry of the password for the router serving as the network gateway. |
Address of Record URI
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Added |
|
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Telstra Enterprise SIP Connect Trunk |
|---|
|
 Image Added
|
NAT Public Interface
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The public interface used for Network Address Translation (NAT). |
State
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Protocol and Port
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The User ID for use in authentication. |
Authentication Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password to use when authenticating with the User ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The re-entered password for confirmation. |
Trunk Pilot Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Added |
|
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Verizon Managed Service |
|---|
| Image Added |
|
|
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Re-enter the password for the Authentication ID.
|
...
The FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Domain name associated with the DNS IP address The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define Define the number of users. Valid entry 1 - 1000. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
|
|
|
noprint
...
Back to top
Broadsoft Trunk - Field Definitions
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
|
|
|
| Noprint |
|---|
Back to top
Step 3 - Confirm and Submit Configuration
...
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
|
|
|
|
|