Page History

Prerequisites

The following must be executed prior to installing SBC SWe Lite on Microsoft Hyper-V:

1. Downloading the SBC SWe Lite Package.
2. Verify Power Options in Microsoft Windows is set to High Performance.
   
   1. From Microsoft WIndows, click Start.
   2. Right-click Control Panel.
   3. Select Hardware.
   4. Select Power Options.
   5. Select High performance.

From Microsoft Windows Device Manager, disable the VLAN and VM Queues to improve network performance.

1. From Device Manager, expand Network Adapters.
2. Right-click on a network adapter and select Properties.

3. Select the Advanced tab.

   Note
   title Note
   The following steps may not be applicable to some Windows versions, and should be skipped if the Virtual Machines Queues and VMQ LAN Filtering options are not present in the Property field. Perform the following steps for each network adapter.

4. In the Property field, select Virtual Machine Queues.
5. In the Value field, select Disable.
6. In the Property field, select VMQ VLAN Filtering.
7. In the Value field, select Disable.

8. Click OK.

   Note
   title Note
   The SBC SWe Lite requires at least two Virtual Switches configured on a Hyper-V host prior to the installation. Refer to https://technet.microsoft.com/en-us/windows-server-docs/compute/hyper-v/get-started/create-a-virtual-switch-for-hyper-v-virtual-machines for configuration details.

Virtual Machine (VM) Setup

Refer to Microsoft TechNet for additional details about Microsoft Hyper-V installed on a host or hosts allocated for the

1. Launch Hyper-V Manager from the Windows Start menu.

2. Select Import Virtual Machine from the Action drop-down menu.

   Caption
   0 Figure 1 Import Virtual Machine 3 Import Virtual Machine
   Image Modified

3. Click Browse and navigate to the SBCSWeLite-hyperv folder containing the VM to import, then click Next.

   Caption
   0 Figure 1 Locate Folder 3 Locate Folder
   Image Modified

4. Click Next in the Locate Folder dialog box to display the selected folder.

5. Select the VM to import from the Select Virtual Machine dialog box, and then click Next.

   Caption
   0 Figure 1 Select Virtual Machine 3 Select Virtual Machine
   Image Modified

6. Select Copy the virtual machine (create a new unique ID) option, and then click Next.

   Caption
   0 Figure 1 Choose Import Type 3 Choose Import Type
   Image Modified

7. The default settings are displayed in the Choose Destination dialog box. Leave all locations in the default state, and click Next.

   Caption
   0 Figure 1 Default Settings 3 Default Settings
   Image Modified

8. Click Next to store the virtual hard disks in the default folder, or click Browse to designate a different folder, and then click Next.

9. Click Next to proceed to the Summary dialog box. 

   Caption
   0 Figure 1 Folder to Store Virtual Hard Disks 3 Folder to Store Virtual Hard Disks
   Image Modified

10. Click Finish.

    Caption
    0 Figure 1 Completing Import Wizard 3 Completing Import Wizard
    Image Modified

11. After the image is copied, if desired, rename the VM with the intended 

    Spacevars
    0 series3

    host name by selecting Rename in the SBCSWeLite section of the Actions pane.

Configuring Network Adapters

1. Select the renamed VM and then click Settings in the Actions list.

   Caption
   0 Figure 1 Select Settings 3 Select Settings
   Image Modified

2. Select the first Network Adapter.

3. Select the Virtual Switch that is appropriate for your location.

   Caption
   0 Figure 1 Select Virtual Switch 3 Select Virtual Switch
   Image Modified

4. Repeat steps 2 and 3 for the remaining four adapters.

5. Click OK to save and exit the Settings window. 

6. Right click on the VM name and then select Start.

   Caption
   0 Figure 1 Start Virtual Machine 3 Start Virtual Machine
   Image Modified

7. Double-click on the VM name to monitor the startup progress and identify the initial Admin IP address.

   Caption
   0 Figure 1 Administrative IP 3 Administrative IP
   Image Modified

8. Determine if a valid IP address was generated at the bottom of the previous figure.