This object contains signaling packet capture devices and admin state. The Signaling Use the Signaling Packet Capture window to configure the Signaling Packet Capture utility. Signaling Packet Capture data is stored in a ".PKT" file under in the location: /var/log/sonus/evlog/evlog location.
| Note |
|---|
In the absence of any device or filter configuration, The Signaling Packet Capture will capture only the SIP/H323 signaling for calls which are traced by Call Trace Filters. |
To View and Edit Signaling Packet Capture
| Info |
|---|
|
This utility is intended for use in debugging and should only be used with a limited number of calls at any one time. |
On the On SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Troubleshooting - Call Trace - Signaling Packet Capture |
|---|
|
|
The following fields are displayed:Use the following table to edit the fields and then click Save.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Signaling Packet Capture Parameters |
|---|
|
| Parameter | Description |
|---|
| Signaling Packet Capture Timer |
Specifies the | The signaling packet capture timer |
in seconds. It describes the call trace timer Calls and Error Trace Filters| call and error trace filters. The value ranges from 0 to 360 |
seconds and the | minutes, with a default value |
is seconds| . | | State | Use this flag to enable/disable |
Signaling Packet Captures. It also specifies the administrative state of signaling packet capture:disabled (default) enabled
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
...
signaling packet captures by enabling/disabling the timer. |
|
Additional topics:
| Div |
|---|
| style | padding-left:1%; |
|---|
| id | indent |
|---|
|
|
...