Prerequistes

Steps to Creating an Effective SMM Translation

Step 1: Add a Condition Rule

If there are any conditions for the SMM Rule, add a Condition Rule.

...

Examples include:

1. • Only on a particular phone number

   • Only a specific header (name)


In the example below, the Called Number must be 'anonymous'. This condition will be applied later in the SIP Message Rule.

Panel
borderStyle none
Caption 0 Figure 1 When Called Number Is Anonymous Image Removed

Panel1a: Add a Condition Rule
1b:

Select a Match Type Token value; this states the SIP Packet element (diversion number, IP address, etc.) for the match. Then, complete of the remainder which provides the value you desire to match.

Step 2: Select SIP Packets to be changed

Decide which type of SIP packets are to be changed (All Messages, All Requests, All Responses, Select Messages). The types of SIP packets to be changed is selected when the SMM Message Rule Table is created.

1. Panel
   borderStyle none
   Caption 0 Figure 1 Creating an SMM Rule Table Image Removed

   Panel2a: Add a Add the SIP Message Rule Table.
2. 2b: Select Configure which SIP Messages messages will be examined by this Rule Table.
3. Configure whether the 2c: Will this SMM Table will be Mandatory or Optional within in the Signaling Group?What .

Step 3: Select SIP Packet element

...

1. Click the name of the newly created SMM Table in the left-hand navigation tree, then add an SMM Rule entry.

2. Which type of Rule? Use the diagram below!

   Panel
   borderStyle none
   Caption 0 Figure 1 Select Appropriate SMM Rule Type Image Removed Image Removed

   Panel3: Add one of the Rule Types

   Select rule type: Header, Request, Status, or Raw

Step 4: Identify which rule section corresponds to the SIP element to be changed

1. Add SIP Header Rule.

2. For Header Value, configure the URI User. For example,

   you want to change.Example: If you wanted

   to change the FROM number to something other than anonymous

   
   

   (i.e, From

   :

   <sip:

   anonymous@10

   anonymous@10.1.1.74>;tag=254b0000

   Panel

   borderStyle	none

   ).
   
   

   Caption
   0

   Figure

   Table 1

   Identify Rule Section

   Image Removed

   Use the references below if you're uncertain about which configuration to use

   Panel ExpandClick here to see the mapping between SIP packet elements and their corrsponding SMM configurationsClick here to see the mapping between SIP packet elements and their corrsponding SMM configurations

   Caption
   0 Figure 1 Mapping Between SIP Packet Elements and Corresponding SMM Configurations
   Image Removed Image Removed Image Removed

   Select the appropriate type of change

   Mapping Between SIP Packet Elements and Corresponding SMM Configurations

   SIP Header Rule Field Corresponds to SIP message field Header Name From Display Name name URI Scheme sip URI User 1010 Password password URI User Parameters usr=param URI Host IP address (i.e., 10.1.1.74) URI Port URI port (i.e, 5061) URI Parameters user=phone Header Parameters Header (i.e., tag=254b0000)

Step 5: Select Type of Change to be made

Configure the rule to correspond with the manipulation you require.

1. Access SIP Header Rule.

2. Panel
   borderStyle none
   Caption 0 Figure 1 Steps to Create SMM Rule Image Removed

   Panel5a: Select the Result Type. This setting operates exactly the same as the Translational Table optional/mandatory.
3. 5b: Set the Action to Add, Remove, Copy, or Modify. The available options will vary based upon the type of rule you're adding. If you think about it, you can't _add a Request URI or Status Line; the SIP packet already has one, right?
4. 5c: For a Header Rule, you'll need supply Configure a Header Name (either from the pre-progammed list or by simply typing the name of the header if it doesnisn't appear in the list). Request and Status Rules address only the Request and Status headers, so ; those rules don't require the user to pick do not require a header to be chosen.
   
5. 5d: Configure the target rule setting. In the case of the example for For example, when changing any calling number of anonymous to 1000, set the User URI info Info to Modify and add the configuration/value you want for the SIP element changed to.
6. 5e: If you created a Condition in Step 1, add it to the Rule entry now . In this example, the SMM will only execute if the Calling Number is 'anonymous'.

7. Select the appropriate type of change to be made.
   
   

Step 6: Configure

...

the new rule into either a Signaling Group or Call Route

...

Configure the new rule into either a Signaling Group or Call Route (SMM Rules can be processed either ingress or egress at the Signaling Group).

Panel
borderStyle none
Caption 0 Figure 1 Configure SMM Into Signaling Group Image Removed

Info
For details on Signaling Groups or Call Routes, refer to Managing SIP Signaling Groups or Managing Call Routing Tables.

Important Notes