Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel

In this section:

Table of Contents
maxLevel2

 

Use this object to define ingress IP prefixes. Up to 128 Ingress IP Prefix entries may be assigned to a SIP trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified SIP trunk group.

To View Ingress IP

Prefix

Prefixes

On the

Spacevars
0product
 main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > Ingress IP Prefix. The Ingress IP Prefix window is displayed.

Caption
0Figure
1System Provisioning - Ingress IP Prefix

Image Removed

To Edit Ingress IP Prefix

To edit any of the Ingress IP Prefixes in the list, click the radio button next to the specific Ingress IP Prefix name.

Caption
0Figure
1System Provisioning - Ingress IP Prefix Highlighted

Image Removed

The Edit Selected Ingress IP Prefix window is displayed below Use the drop-down lists to select the desired Address Context, Zone and SIP Trunk Group.

Caption
0Figure
1System Provisioning - Ingress IP Prefix Edit Window

Image Modified

You would not be able to edit as the fields are read-only.

To Create an Ingress IP Prefix

To create a new Ingress IP Prefix, click New Ingress IP Prefix tab on the Ingress IP Prefix List panel.

Caption0

Figure1System Provisioning - Ingress IP Prefix Fields

Image Removed

The Create New Ingress IP Prefix window is displayed.

Caption
0Figure
1System Provisioning - Ingress IP Prefix Create Window

Image Modified

The following fields are displayed:Use the following table to specify its attributes and click Save. An Ingress IP Prefix cannot be edited after it is created.

Caption
0Table
1System Provision - Ingress IP Prefix Parameters

Parameter

Description

IP Address V4 or V6

Specifies the IPv4 or IPv6 addresses of ingress peers. Enter the address in the following format:

  • IPv4 – Specifies the V4 IP IPv4 address in dotted decimal form (for example 10.11.12.0 24).
  • IPv6 – The V6 IP IPv6 address in hexadecimal/colon form (for example, fd00:21:445:128::7880 64).
Prefix LengthSpecifies the number of bits of address which bits which form the network part of the IP address. Rest The rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 0.32.
Available_since
TypeModified For
Release6.2.2

To Copy an Ingress IP Prefix

  1. To copy
any of the created
  1. an Ingress IP Prefix
and to make any minor changes
Caption
0Figure
1System Provisioning - Ingress IP Prefix Highlighted

Image Removed

  1. , click the radio button next to the specific Ingress IP Prefix you want to
highlight the row.
  1. copy.
  1. Click Copy Ingress IP Prefix
tab on the Ingress IP Prefix List panel
  1. .
Caption
0Figure
1System Provisioning - Ingress IP Prefix Fields

Image Removed

  1. The Copy Selected Ingress IP Prefix window is displayed
along with the field details which can be edited
  1. .
caption
0Figure
1System Provisioning - Ingress IP Prefix Copy Window

Image Removed

Make the required changes to the required fields and click Save to save the changes
  1. Make any changes and click Save. The copied Ingress IP Prefix is displayed at the bottom of the original Ingress IP Prefix in the Ingress IP Prefix List panel.

To Delete an Ingress IP Prefix

  1. To delete
any of the created
  1. an Ingress IP Prefix, click the radio button next to the specific Ingress IP Prefix
which
  1. that you want to delete.
Caption0Figure
1System Provisioning - Ingress IP Prefix Highlighted

Image Removed

Click Delete at
  1. Click X at the end of the
highlighted
  1. row
. A delete confirmation message appears seeking your decision.
  1. .
  2. Confirm the deletion when prompted
Caption
0Figure
1System Provisioning - Ingress IP Prefix Delete Confirmation

Image Removed

Click Yes to remove the specific Ingress IP Prefix from the list
  1. .

Pagebreak