In this section:
Use this object to define ingress IP prefixes. Up to 128 Ingress IP Prefix entries may be assigned to a SIP trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified SIP trunk group.
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > Ingress IP Prefix. The Ingress IP Prefix window is displayed. Use the drop-down lists to select the desired Address Context, Zone and SIP Trunk Group.
System Provisioning - Ingress IP Prefix
To create a new Ingress IP Prefix, click New Ingress IP Prefix on the Ingress IP Prefix List panel.
The Create New Ingress IP Prefix window is displayed.
System Provisioning - Ingress IP Prefix Create Window
Use the following table to specify its attributes and click Save. An Ingress IP Prefix cannot be edited after it is created.
System Provision - Ingress IP Prefix Parameters
Parameter | Description |
---|---|
IP Address V4 or V6 | Specifies the IPv4 or IPv6 addresses of ingress peers. Enter the address in the following format:
|
Prefix Length | Specifies the number of bits which form the network part of the IP address. The rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 32. Modified: for 6.2.2 |