Page History

...

Unlike a Controlled Partition Upgrade, the Sonus SBC 1000/2000 provides

Spacevars
0 product

 (SBC) provides a "One-Step Upgrade" solution which automatically upgrades the currently inactive partition, makes it active, and boots the Sonus SBC 1000/2000 from the newly upgraded partition. Sonus recommends using this One-Step Upgrade operation after Running Initial Setup, or during scheduled downtime.

...

Info
The Software Upload progress bar is supported in the following browsers: Internet Explorer, Releases 10 and 11 Firefox, Release 24 and later Chrome, Release 31 and later In browsers that do not support this feature, the software upgrade process will be presented the way it is shown in Release 4.0 and previous.

Automatically Upgrading the

...

SBC

...

Software/Firmware Version

To automatically upgrade the Sonus SBC 1000/2000 software:

1. In the WebUI, click the Tasks tab.

2. In the left navigation pane, click System > Firmware Upgrade.

3. Perform a Backup on the configuration file.

   Panel
   borderStyle none
   Caption 0 Figure 1 Backup on Configuration File Image Modified

4. Enter an optional Passphrase (see Using the Custom Passphrase).                                                    

5. Under Select File, click the Browse button and select the Sonus SBC 1000/2000 firmware file listed in the general Sonus SBC 1000/2000 Upgrade guideto  to upload.

   Panel
   borderStyle none
   Caption 0 Figure 1 Upload Firmware

6. Click Upgrade. The following warning popup will be displayed:

   Panel
   borderStyle none
   Caption 0 Figure 1 Warning Popup Image Modified

    

   Pagebreak

    

7. Anchor
   Software Upload Software Upload

   Click OK to upload the new firmware. Do not close or navigate away from the browser window, or you may receive partial results. Throughout the upload process, the web interface displays update messages to indicate the progression of the upgrade, as shown below. (If you navigate to this view from another browser, it will also display the progress.) Once the upgrade is complete, the system automatically reboots.

   Panel
   borderStyle none
   Caption 0 Figure 1 Upgrade Progress

...

Info
An average upgrade takes about 8 - 9 minutes. During the upgrade process, the remaining time estimates in the different steps becomes more accurate as the process progresses.

_Sonus SBC1000-2000_Reboot__DurationUpon completion, you will be automatically redirected to the Login screen. Verify that you are booting from the new partition either by checking the active partition, or by Viewing the Software Version.

Tip
title Helpful Tip
Include Page
_Sonus SBC1000-2000_Reboot_Tip_Duration	Tip
noPanel	true

Pagebreak