Page History
Add_workflow_for_techpubs | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Panel | ||||
---|---|---|---|---|
In this section:
|
Accounting File Version Change
The CAM version of
release 10.01.00 is 100.00.00. Spacevars 0 series4
For more information, refer to the section Billing Introduction.
CAM Field Changes
10.1.0R0
New Accounting Record Fields in Release
Info |
---|
Refer to the following pages for details: |
New Call Accounting CDR field 212: CAC Fail Info is added in support of feature SBX-65791 which fixes issues identified with CAC usage.
| ASCII Accounting | |||||
---|---|---|---|---|---|---|
Max | Type | Record Number | ||||
START | STOP | ATTEMPT | INTERMEDIATE | |||
CAC Fail Info | - | - | NA | NA | 212 | NA |
CAC Level | 32 | String | NA | NA | 212.1 | NA |
CAC Type | 32 | String | NA | NA | 212.2 | NA |
Cause Text | 64 | String | NA | NA | 212.3 | NA |
Q850 Code | 3 | Decimal | NA | NA | 212.4 | NA |
New Call Termination Reason Code
New Call Termination Reason Code is added to indicate the call failure due to node-level CAC configuration.
Info |
---|
Refer to the following page for details: |
ID | Definition |
---|---|
220 | CPC_DISC_NODE_CAC_LIMIT_REACHED This indicates the call is rejected due to node level CAC limit is reached. |
New Field 213: Node Name (Reserved)
| ASCII Accounting | |||||
---|---|---|---|---|---|---|
Max | Type | Record Number | ||||
START | STOP | ATTEMPT | INTERMEDIATE | |||
Node Name (reserved Field) | 256 | String | NA | NA | 213 | NA |
Field 295 Media IPSec Information
This field is reserved and does not get populated in this release.
New CDR Fields for GUID feature (Reserved)
The Global Identifier (GUID) for a call is unique across multiple SBCs. This field is added to the STOP and ATTEMPT records.
STOP:294 and ATTEMPT:211
Field Name | ASCII Accounting | ||||||
---|---|---|---|---|---|---|---|
Max ASCII Length | Type | Possible Values | Record Number | ||||
START | STOP | ATTEMPT | INTERMEDIATE | ||||
GUID | 128 | String | Ex:10d873b3-4c36-43b4-aced-0dbca7034926609b7600000d00 | NA | 294 | 211 | NA |
10.1.2R0
New CDRUpdate to 'CDR field Media IPSec Information
' Field
The SBC software is updated in this release to populate the "Media IPSec Information" field.
Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
| ASCII Accounting | ||||||
---|---|---|---|---|---|---|---|
Max | Type | Possible Values | Record Number | ||||
START | STOP | ATTEMPT | INTERMEDIATE | ||||
Media IPSec Information | - | - | - | NA | 295 | NA | NA |
IPSec Enabled | 7 | String | Ingress Egress Both | NA | 295.1 | NA | NA |
Ingress Remote Tunnel IP | 32 | String | IP Address | NA | 295.2 | NA | NA |
Egress Remote Tunnel IP | 32 | String | IP Address | NA | 295.3 | NA | NA |
10.
01.
0R0New CDR Fields for GUID feature (Reserved)
For SBC 11.0 release, Global Identifier (GUID) for call will be unique across multiple SBCs. This field would be added in3R0
There are three fields added in the SIP Protocol Variant String addressing the handling of RCD passport headers. These fields are added in the START, STOP, ATTEMPT, and INTERMEDIATE CDR records.
START:192, STOP:294, ATTEMPT:211 and INTERMEDIATE:185
The fields added in 10.1.3R0 are only visible in the CDRs when the following control, that is patch version 1, is configured:
Code Block | ||
---|---|---|
| ||
set oam accounting admin patchVer 1 |
When this control is enabled the ACT file rolls over and the CAM version changes to "00640100".
Sub-field | Name | Length | Type | Field Description |
---|---|---|---|---|
87 | STI RCD Service Type | 1 | Decimal | Can have field values for the following service types:
|
88 | STI RCD Service Status | 1 | Decimal | Can have field values for the following service status:
Note: The Service status might not be the actual value for Failure service status, as ppt=rcd Verification/Signing is not supported in this release. |
89 | STI RCD Reason Code | 3 | String | An error code providing the reason for the STI service failure using the error code mapping profile. |
The size of the Ingress and Egress External Accounting Data fields are increased to 150 characters when the patch version 1 is configured.
| ASCII Accounting | |||||
---|---|---|---|---|---|---|
Max | Type | Record Number |
START | STOP | ATTEMPT | INTERMEDIATE |
---|
Ingress External Accounting Data | 150 | Characters | 119 | 142 | 132 | 122 |
Egress External Accounting Data | 150 | Characters | 120 | 143 | 133 | 123 |