This section describes the following
CRUs: Info |
---|
|
Refer to SBC 5400 CRUs for details of CRUs. |
Panel |
---|
borderColor | green |
---|
bgColor | transparent |
---|
borderWidth | 2 |
---|
|
Additional sections: |
This section describes all SBC 5000 series CRUs except for those pertaining to the SBC 5400. See SBC 5400 CRUs for details.
|
---|
Component Replacement Behavior |
In the series | platform, system behavior in the case of component replacement and insertion is a combined function of both the hardware and the software. The component replacement behavior of the platform is: customer replaceable units (CRUs) are classified as either hot swappable, hot pluggable or cold pluggable as defined below. Hot Swappable Behavior: A hot swappable component |
can be removed and replaced without any involvement on the part of the useris installed, removed or replaced without stopping or shutting down the system. The appropriate alarms |
will be are raised and automatically cleared by the system during this action. The |
node deliver service operate normally if it is the active server, or continues to provide HA protection if it is the standby |
. The hot swappable behavior provides a simple, higher-performance, and more maintainable method of achieving autonomic behavior. Note |
---|
Refer to the specific FRU/CRU replacement instructions. |
server. Hot Pluggable Behavior: A hot pluggable component |
can be is installed, removed or replaced |
when while the system is in running condition |
. A certain level of user involvement is required to avoid any undesirable outcome. The node stops providing the service. Depending on ; however, the user must take action to ensure service is not interrupted during the time of the installation, removal or replacement because the SBC stops providing service during this maintenance window. Note that depending upon the removed component or device, the BMC may immediately power down the remaining components. Removing a hot pluggable component must not damage the component or the any other component |
of ...
Cold Pluggable Behavior: A cold pluggable component is installed, removed or replaced only after the system is powered down and input power removed. |
Caption |
---|
0 | Table |
---|
1 | SBC 5000 Series Component Replacement Behavior |
---|
3 | Component replacement behaviorSBC 5000 Series Component Replacement Behavior |
---|
|
Component Name | Component Replacement Behavior |
---|
AC/DC power supply | Hot Swappable | Fan assembly | Hot Swappable | Air FiltersFilter | Hot Swappable | Solid State DrivesDrive (SSD) | Cold Pluggable | SFP | Hot Swappable | SFPs | Hot Swappable | Bezel | Hot Swappable | Solid State Drive | Hot Swappable | SBC 5x10 DSP20/25 Modules | Hot Swappable |
|