...
- Deployment via Hyper-V VM. Unsupported third-party applications can be installed using a VM. For these applications, the ASM runs in Appliance mode. is not responsible for the performance or support of third party applications installed onto the VMs. See Installing Unsupported Third-Party Applications on the ASM via VM. Refer to the respective VM supplier's documentation for deployment instructions.
...
- Remove all third-party party applications from the system.
- Re-initialize the ASM using the Cloud Connector Edition (CCE) image found on the hard drive. See Re-initializing the ASM.
From the ASM image type drop down, select Cloud Connector Edition.
Caption |
---|
0 | Figure |
---|
1 | Re-initialize the ASM |
---|
|
Image Added Image Removed |
After re-initialization, the SBC will now run as a Cloud Link and return to Appliance mode. All 3rd party programs must be removed.
...
- Remove all third-party party applications from the system.
- Re-initialize the ASM using the SBA image found on the hard drive. See Re-initializing the ASM.
From the ASM image type drop down, select the SBA image.
Caption |
---|
0 | Figure |
---|
1 | Re-initialize the ASM |
---|
|
Image Added Image Removed |
After re-initialization, the SBC will now run as an SBA and return to Appliance mode. All 3rd party programs must be removed.