...
borderColor | green |
---|---|
bgColor | transparent |
borderWidth | 2 |
Noprint |
---|
Additional sections:
...
The BMC web application allows provisioning primary and secondary of the four host management interfaces. When the host management interfaces are configured, a direct link from BMC is enabled to the EMA/EMA Platform Mode for installing and upgrading the
Spacevars | ||
---|---|---|
|
Info | ||
---|---|---|
| ||
Related article:
|
Use the following procedure to configure the primary and secondary 4 host management interfaces:
Log on to SBC BMC GUI using the IP address configured in one of the previous sectionsections.
Infocode | |||||
---|---|---|---|---|---|
| |||||
Use any one of the following methods to obtain the BMC IP address: - Configuring SBC 5400 BMC IP Address Via Serial Console Or - Configuring SBC 5400 BMC for Remote Access username: root password: superuser |
The BMC Main Screen appears:
Caption | ||||
---|---|---|---|---|
| ||||
Click Navigate to Configuration > Platform Management Network tab. The Platform Management Network Settings screen is displayed.
Info | ||||
---|---|---|---|---|
| ||||
Refer to SBC 5400 Media Ports and Operation Operational Modes to know more about these four media ports and their operational modes. | ||||
Warning | ||||
Any changes to the media port speed, deletes the existing configuration. To use the option, |
The SBC 5400 platform includes the following configurable media port configurations.
Caption | ||||
---|---|---|---|---|
| ||||
|
Media Port Speed | Description |
---|---|
10 Gbps |
|
1 Gbps | In 4x1Gbps mode:
In 2x1 Gbps mode:
|
Note |
---|
In 10 Gbps mode, only media0 is configurable and operable. |
Note |
---|
|
The media port speed is user- configurable and the following licenses are added in this release in support of the media port configurations:
.
Caption | ||||
---|---|---|---|---|
| ||||
Info | ||||
---|---|---|---|---|
| ||||
A message appears to enter the management IP addresses for the first time installation. |
If the management interfaces have not yet been configured, a warning message appears. Click OK to proceed with the Management Port configuration.
Caption | ||||
---|---|---|---|---|
| ||||
| |
- IPv4 Address or/and IPv6 Address
- Prefix
- Default Gateway, Prefix and Default Gateway
- IPv6 Address, Prefix and Default Gateway
Info | ||||
---|---|---|---|---|
| ||||
The IPv4 Address, Prefix and Default Gateway should be configured for Management Interface "0". For all other Management Interfaces, the settings are optional. |
Caption | ||||||
---|---|---|---|---|---|---|
| ||||||
Click Save.
...
Info | ||||
---|---|---|---|---|
| ||||
Once you save the changes to the Management IP addresses, a warning message appears. Note that the changes to the Management IP addresses will only take effect when the SBC application is Installed (or re-Installed if already present). Refer to SBC 5400 - Installing Application for more information. |
Caption | ||||
---|---|---|---|---|
| ||||
...
...
Pagebreak |
---|