Page History

In this section:

SWe Lite supports the following (depending on your license):

• For Memory (RAM), valid settings are 1 GiB (1024 MiB), 1.5 GiB (1536 MiB), or 2.5 GiB (2560 MiB).
• For vCPUs, valid settings are 1, 2 or 4 vCPUs.

For detailed information, refer to SBC SWe Lite Hardware and Software Requirements.

For adding vCPUs or increasing memory on a SWe Lite upgraded to Release 7.0, refer to Adding vCPU and Increasing Memory.

Prerequisites

Refer to Downloading the SBC SWe Lite Package prior to performing this procedure.

Limitations

• Disk and network drivers must be selected during deployment only.

• Changing disk or network drivers post-deployment is not recommended.

Create New Virtual Machine

1. Start the Virtual Machine Manager. 
   

   Caption
   0 Figure 1 Start Virtual Machine Manager 3 Start Virtual Machine

2. Select New Virtual Machine from the File drop-down menu.

   Caption
   0 Figure 1 New Virtual Machine 3 New Virtual Machine

3. From the Create New Virtual Machine dialog, select Import existing disk image and click Forward.

   Caption
   0 Figure 1 Create New Virtual Machine 3 Create New Virtual Machine

4. Select Linux from the OS type drop-down menu.
   

5. Select Debian Squeeze from the Version drop-down menu  .

6. Click Browse and navigate to the location of the disk image. 

7. From the Choose Storage Volume dialog, select file SBCSWeLite-disk1.qcow2, then click Choose Volume.

8. Click Forward.

   Caption
   0 Figure 1 OS Type and Version 3 OS Type and Version

9. Set Memory (RAM) field to 1024, 1536, or 2560.

10. Set CPUs to 1, 2, or 4, and click Forward.

     

    Caption
    0 Figure 1 Memory and CPU Settings 3 Memory and CPU Settings

11. Enter the name of your new VM in the Name field.
12. Select the Customize configuration before install option.

13. From the New VM dialog, select the applicable network from the Network selection drop-down menu, and click Finish.

    Note
    icon false title Note
    This network is used for Management Interface.

    Caption
    0 Figure 1 Finalizing Create New Virtual Machine 3 Finalizing Create New Virtual Machine

Customize Configuration

Add the Virtual Disks

1. In the new pop-up window, select Disk 1 (VirtIO or IDE).

2. Expand Advanced options and select IDE or VirtIO VirtIO (for Release 7.0) or IDE (for Release 6.1) from the Disk bus drop-down menu.  

   Caption
   0 Figure 1 Adding Hardware 3 Adding Hardware

   
   

3. Click Add Hardware.
4. Select Storage.

5. Select Select or create custom storage.  

6. Navigate to file SBCSWeLite disk2.qcow2.

7. Select IDE or VirtiO VirtIO (for Release 7.0) or IDE (for Release 6.1) from the Bus Type drop-down menu, and click Finish.

   Caption
   0 Figure 1 Managing Storage 3 Managing Storage

8. Repeat steps 4-6 for IDE or Virtio for VirtIO (for Release 7.0) or IDE (for Release 6.1) Disk 3. 
   

   Caption
   0 Figure 1 Repeat for Disk Three 3 Repeat for Disk Three

   
   

Modify Network Interface Device Model

1. Select NIC.

2. Select virtio from the Device model drop-down menu, then click Apply. 
   

   Caption
   0 Figure 1 Modify Virtual Network Interface 3 Modify Virtual Network Interface

Add Virtual Network Interfaces

1. Click Add Hardware.
2. From the Add New Virtual Hardware dialog, select Network.
3. Select the desired Bridge id from the Network source drop-down menu.
4. Select virtio from the Device model drop-down menu, and then click Finish.

5. Repeat steps 1-4 for additional Network Interfaces.

   Caption
   0 Figure 1 Adding Network Interfaces 3 Adding Network Interfaces

Finalize Installation

1. From the Virtual Machine dialog, click Begin installation.

   Caption
   0 Figure 1 Begin Final Installation 3 Begin Final Installation

   Note
   icon false title Note
   The configured VM starts automatically as shown below.

   Caption
   0 Figure 1 SBC SWe Lite Running 3 SBC SWe Lite Running

2. Click the monitor icon in the header to open the VM console. 
   

   Caption
   0 Figure 1 Open VM Console 3 Open VM Console