This section is intended only for participants in the SBC SWe Lite Trial Offer. For all other users, proceed to Downloading the SBC SWe Lite Package.

In this section:

Related articles:

Prerequisites

A trial license is required in order to start a SWe Lite Trial. Before you can generate a trial license you must download, install, and perform initial setup on the SBC SWe Lite software – see SBC SWe Lite Trial Offer for details. 

Generating and Installing a SWe Lite Trial License

 

StepAction
1Locate and make note of the SWe Lite ID – refer to
Viewing the Software Version and Hardware ID
.
2

Re-visit the Sonus Self-Service Licensing and Downloads portal, and submit your credentials to gain access.


Enter Your Credentials


3

Click Generate License Key.

Generate License Key

 

4

Click Select Configuration.

Select Configuration

5

Enter the SBC SWe Lite ID (as noted in Step 1) in the UUID#1 field and then click Generate.

Note: In some instances, the field may be named SWe Lite ID#. 

 

Enter the SWe Lite ID

 
 

  • Note: The string under Hardware ID(s): should be equivalent to the SBC SWe Lite ID you submitted when you generated your license; if different, please re-visit your email inboxes for another email or, alternatively, contact Sonus Customer Support.
  • Note: If you do not receive your email within 24 hours, please please re-visit your email inboxes (junk folder, spam folder, Clutter, and so on) for the email; if still not found, contact Sonus Customer Support.
6

Within 24 hours you will receive an email from Sonus Customer Support. Click and save the attachment.

License Email


7

With the attachment open in a text editor, select all text and copy it to your clipboard.

Email Attachment – License Text

8

Open the SBC SWe Lite UI and click the Settings tab, and then click System > Licensing > Install New License.

 

Navigation Pane: Click Through to "Install New License"

9

Review the prompt and then click OK.

Trial License Apply

10

Paste the previously copied License Key text into the designated text box:

Trial License Entered

11

Review the message and then click OK.

Trial License Success

12

To see your currently installed licenses, click System > Licensing > Current Licenses. The circled message here is unique to the SBC SWe Lite Trial Offer.

Installed Trial License With Trial Features Message

 

Next Steps

Proceed to configure the SBC SWe Lite according to desired deployment requirements. A suggested next step is to visit Using the Easy Configuration Wizard.