Versions Compared

Old Version 2

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
top
top

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
JIRAIDAUTHSYM-19713
REV5UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd700a1f, userName='null'}
REV4UserResourceIdentifier{userKey=8a00a0c85c46b657015d4f57d577001c, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c7ca0038, userName='null'}

SBC Easy Configuration supports IPv4 only, not IPv6.
Tip

Using the Easy Configuration wizard to configure the

Spacevars
0product
(SBC)

Tip

Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000.

Info

 

The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 and Skype for Business/Lync. The Sonus SBC 1000/2000 can be configured to connect a Skype for Business/Lync Microsoft UC environment to a SIP trunk using the automatic setup wizard as described in the section below.

The following SIP Trunks are supported:

  • ATT &T IP Flexible Reach
  • Generic SIP Trunk
    • Verizon Managed Service
  • SIP Trunk
  • KDDI SIP Trunk
  • NTT DOCOMO Officelink
  • Other SIP Trunk
  • Softbank White Office
  • Telstra Enterprise SIP Connect
  • Verizon SIP Trunk
Note

NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only.

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents
maxLevel3

Step 1 - Select Scenario

Note

These instructions assume the SBC Easy Config wizard is running. See Running Using the Easy Configuration Wizard.

Select the Application type (SIP ↔ Skype for Business/LyncMicrosoft UC). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).

Scenario Parameters -  Field Definitions

...

width600px

Caption
0Figure
1Step 1

...

Image Added

Application

Panel
bgColor#FAFAFA
borderStylenone

The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ Skype for Business/LyncMicrosoft UC.

Scenario Description

Panel
bgColor#FAFAFA
borderStylenone

Enter the name to describe Skype for Business/Lync Microsoft UC setup.

 

Info

This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment.

Telephone Country

Panel
bgColor#FAFAFA
borderStylenone

The country in which the SIP ↔ Skype for Business/LyncMicrosoft UC setup originates.

Emergency Services

Note

The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Panel
bgColor#FAFAFA
borderStylenone

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options:  ELIN Identifier, E911/E112 or None.

Emergency Callback Number 1

Panel
bgColor#FAFAFA
borderStylenone

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Emergency Callback Number 2

Panel
bgColor#FAFAFA
borderStylenone

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

PSAP Number

Panel
bgColor#FAFAFA
borderStylenone

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

SIP Sessions

Panel
bgColor#FAFAFA
borderStylenone

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

Name (SIP Trunk)

Panel
bgColor#FAFAFA
borderStylenone

The SIP trunk used for connection to the Skype for Business/Lync Microsoft UC environment. Valid options : Generic SIP Trunk, AT&T IP Flexible Reach, and Verizon Managed Serviceare: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk, SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint.

Version (Microsoft UC)

Panel
bgColor#FAFAFA
borderStylenone
 Defines the version of Skype for Business LyncMicrosoft UC. Valid options: Skype for Business or , Lync 2010/2013.
Noprint

Back to top

or Microsoft Cloud Connector Edition

 

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on the SIP Trunk selected in Configure SIP Trunk with Skype for Business/Lync Step 1 - Select Scenario.  Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

...

 

ATT SIP Trunk - Field Definitions

...

These fields apply if you selected Generic SIP Trunk in Configure SIP Trunk with Skype for Business/Lync.

...

ATT SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1

...

ATT SIP Trunk

...

Image Added

Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port

...

Number  (Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

Enables or disables the secondary Session Border Controller service provider configured. 

Secondary Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (Secondary Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (Secondary Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Forking Feature

Panel
bgColor#FAFAFA
borderStylenone

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

AT&T IP Toll Free

Panel
bgColor#FAFAFA
borderStylenone

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

IP Toll Free Access Number

Panel
bgColor#FAFAFA
borderStylenone

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

Server Pool Host

Panel
bgColor#FAFAFA
borderStylenone

The Pool name of the Lync Server (FQDN).

Protocol (Server Pool)

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol used to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel
bgColor#FAFAFA
borderStylenone
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host.

Pagebreak

 

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1KDDI SIP Trunk
3KDDI SIP Trunk

Image Added

SIP Server

Panel
bgColor#FAFAFA
borderStylenone

The FQDN or IP address of the Session Border Controller service provider.

Protocol

Panel
bgColor#FAFAFA
borderStylenone

Hardcoded to UDP.

Port Number

Panel
bgColor#FAFAFA
borderStylenone

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Called Prefix

Panel
bgColor#FAFAFA
borderStylenone

  Used for setting up transformation rules for the FMC service.

Address of Record URI

Panel
bgColor#FAFAFA
borderStylenone

 Address of Record of the client that is registered on the SIP server.

Static Host

Panel
bgColor#FAFAFA
borderStylenone

Specifies the host portion of the FQDN used in the From Header.

Noprint

Back to top

...

Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

Pagebreak

Authentication ID

Panel
bgColor#FAFAFA
borderStylenone

Specifies a user name to use in response to a challenge.

Password

Panel
bgColor#FAFAFA
borderStylenone

The password for the Authentication ID.

Confirm Password

Panel
bgColor#FAFAFA
borderStylenone

Re-enter the password for the Authentication ID.

DNS Server IP

Panel
bgColor#FAFAFA
borderStylenone

IP address (IPv4 or IPv6) of the DNS server.

Domain Name

Panel
bgColor#FAFAFA
borderStylenone

Domain name associated with the DNS IP address.

Port Type

Panel
bgColor#FAFAFA
borderStylenone

Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1.

DS1 Ports

Panel
bgColor#FAFAFA
borderStylenone

The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port).

For example, click Add. Select the desired PSTN port and OK.

Caption
0Figure
1Select ISDN Ports

Image Added

Switch Variant

Panel
bgColor#FAFAFA
borderStylenone

Specifies the ISDN variant for the port type in the ISDN Signaling Group.

For T1

  • ATT 4EES
  • ATT 5EES
  • DMS 100
  • N12
  • Euro ISDN
  • QSIG
  • Japanese ISDN

For E1:

  • Euro ISDN
  • QSIG

ISDN Number Translation

Panel
bgColor#FAFAFA
borderStylenone

Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits).

PBX Prefix

Panel
bgColor#FAFAFA
borderStylenone

The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension.

Extension Length

Panel
bgColor#FAFAFA
borderStylenone

The number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension.

Pagebreak

 

These fields apply if you selected AT&T IP Flexible Reach in Configure SIP Trunk with Skype for Business/Lync.

...

NTT DOCOMO Officelink in Step 1 - Select Scenario.

Caption
0Figure
1NTT DOCOMO Officelink Trunk

 Image Added


Office Link FOMA-R

Panel
bgColor#FAFAFA
borderStylenone
The Host IP address of the SIP Server.

Protocol

Panel
bgColor#FAFAFA
borderStylenone
 The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP.

Port Number

Panel
bgColor#FAFAFA
borderStylenone
 The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062.

CUG Domain Name

Panel
bgColor#FAFAFA
borderStylenone
The FQDN of the SIP Server.

Server Pool Host

Panel
bgColor#FAFAFA
borderStylenone

The Pool FQDN or IP Address of the Lync Server (FQDN).

Protocol

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port number

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.

Other SIP Trunk - Field Definitions

...

These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1

...

Other SIP Trunk

Image Added

...

Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port

...

Number (Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

Enables or disables the secondary Session Border Controller service provider configured. 

Secondary Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (Secondary Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (Secondary Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

...

Server Pool Host

Panel
bgColor#FAFAFA
borderStylenone

The Pool name of the Lync Server (FQDN).

Protocol (Server Pool)

Panel
bgColor#FAFAFA
borderStylenone

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

...

The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel
bgColor#FAFAFA
borderStylenone

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.

Pagebreak

SoftBank White Office - Field Definitions

These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.

Caption
0Figure
1SoftBank White Office

Image Added

Panel
bgColor#FAFAFA
borderStylenone

The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.

Signaling/Media Source IP

Panel
bgColor#FAFAFA
borderStylenone

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

...

The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.

SIP Server

Panel
bgColor#FAFAFA
borderStylenone

The host IP address or FQDN for the SIP server.

Gateway ID

Panel
bgColor#FAFAFA
borderStylenone

The ID used for authenticating with the router at the gateway of the network.

Gateway Password

Panel
bgColor#FAFAFA
borderStylenone

The password used for authenticating with the router at the gateway of the network.

Confirm Password

Panel
bgColor#FAFAFA
borderStylenone

Re-entry of the password for the router serving as network gateway.  

Address of Record URI

Panel
bgColor#FAFAFA
borderStylenone

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabledpublic address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer.

Server Pool Host

Panel
bgColor#FAFAFA
borderStylenone

The Pool name FQDN or IP Address of the Lync Server (FQDN).

Protocol

...

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Port number

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.


Telstra Enterprise SIP Connect - Field Definitions

These fields apply if you selected Telstra Enterprise SIP Connect  in Step 1 - Select Scenario.

Caption
0Figure
1Telstra Enterprise SIP Connect

Image Added

NAT Public Interface

Panel
bgColor#FAFAFA
borderStylenone

The public interface used for Network Address Translation (NAT).

State

Panel
bgColor#FAFAFA
borderStylenone

The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).

Protocol and Port

Panel
bgColor#FAFAFA
borderStylenone

Hard coded as UDP and Port 5060.

SIP Connect DNS IP

Panel
bgColor#FAFAFA
borderStylenone

The IPv4 address used to create a Split DNS entry for the Telstra domain.

SIP Connect Domain/Realm

Panel
bgColor#FAFAFA
borderStylenone

The SIP Connect Domain or Realm to which the specified IP address will map.

Authentication User ID

Panel
bgColor#FAFAFA
borderStylenone

The User ID for use in authentication.

Authentication Password

Panel
bgColor#FAFAFA
borderStylenone

The password to use when authenticating with the User ID.

Confirm Password

Panel
bgColor#FAFAFA
borderStylenone

The re-entered password for confirmation.

Trunk Pilot Number

Panel
bgColor#FAFAFA
borderStylenone

The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.

Server Pool Host

Panel
bgColor#FAFAFA
borderStylenone

The Pool FQDN or IP Address of the Lync Server (FQDN).

Protocol

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port number

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between

...

SBC

...

and the Server Pool Host.

...

Default value: 5067.

 

Verizon SIP Trunk

Noprint

Back to top

...

- Field Definitions

...

width600px

These fields apply if you selected Verizon Managed Service in Configure SIP Trunk with Skype for Business/Lync.

...

SIP Trunk in Step 1 - Select Scenario.

Caption
0Figure
1Verizon Managed Service

Image Modified 

Border Element Server

Panel
bgColor#FAFAFA
borderStylenone

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP.

Port Number (Border Element Server)

Panel
bgColor#FAFAFA
borderStylenone

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Server Pool Host

Panel
bgColor#FAFAFA
borderStylenone

The Pool name of the Skype for Business / Lync Server (FQDN).

Protocol (Server Pool)

Panel
bgColor#FAFAFA
borderStylenone

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

noprint
Panel
bgColor#FAFAFA
borderStylenone

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host.

Pagebreak

...

Back to top

Step 3 - Confirm and Submit Configuration

This step displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).

...

width600px

This example displays a SIP ↔ Skype for Business/Lync Microsoft UC with a Generic KDDI SIP Trunk.

...

Caption
0Figure
1Step 3

...

Image Added

Pagebreak