Page History

REST API Method: POST /rest/partition/{identifier}?action=upgrade

This action causes the SBC Edge system to be upgraded to a new software version.

Info
If the system is being upgraded to a new software image, the upgrade needs to be performed on the non-active partition (either partition 2 or 3). If the boot partition is being upgraded, the action needs to be performed on partition 1.

Note
An HTTP Status 200 return for this action only means that the request was successfully received by the system and some pre-validation is performed. The upgrade process can take a while and so it is the responsibility of the client to perform HTTP_GET requests on the Partition Resource and check on the status by inspecting the rt_Download_Result_Code attribute.

https://192.168.0.111/rest/partition/{identifier}?action=upgrade

POST

true

Noprint

Panel

bgColor	transparent
titleBGColor	#DDD
title	[partition - REST API Methods\|Resource - partition]

Page Tree

root	@parent

Parameter Name

Required

Service Affecting

Data Type

Default Value

Possible Values

Description

Filename

Yes

No

string

none

255 - Max Length

Identifies the name of the software image file being restored into the SBC Edge.

Info
If the upgrade is being performed from an existing SBC Edge Release 1.3.x version, then the file needs to be of extension .tar.gz. For all other upgrades from Release 2.0.0 onwards, the file needs to be of extension .img.