Page History

Add_docset_workflow

AUTH1 clemetscUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc2c078f, userName='null'} DEV1 prakashUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c9230222, userName='null'} LDEV1 clemetscUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc2c078f, userName='null'} SVT1 tangmUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cba30625, userName='null'} LSVT1 clemetscUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc2c078f, userName='null'} AUTHJID SYM-17606

BroadWorks XSP enables you to remotely reconfigure the Sonus 

Spacevars
0 product

nodes using a SIP NOTIFY message.  This specific aspect of device management of BroadWorks XSP is known as BroadWorks Device Management (DM). The Broadsoft Provisioning feature within the

Spacevars
0 product

enables interoperability with the BroadWorks DM infrastructure for centralized management of boot-loader, software and configuration updates for every SBC managed by BroadWorks.

...

Administrator configuration creates a device profile type and is performed by a Broadworks administrator. It should be completed before proceeding to BroadWorks Provisioning.

Pagebreak

BroadSoft Administrator Configuration

...

Create Device management tag set example : SBC1000_dm-Tags, SBC2000_dm-Tags.  All the tags that will be defined by Sonus will be under this.

Panel
borderStyle none
Caption 0 Figure 1 Device Management Tag Sets Image Modified

 

Pagebreak

Create Device Profile Type

Device profile represent the devices itself.  Device profile will be named -SBC2000_dm.

Panel
borderStyle

...

none

Caption 0 Figure 1 Device Profile Type Image Modified

 

Set System Level Configuration File Type

...

Pagebreak

 

Panel
borderStyle none
Caption 0 Figure 1 System Level Configuration  Image Modified

 

Set Device Specific Configuration File

...

Panel
borderStyle none
Caption 0 Figure 1 Device Specific Configuration  Image Modified

 

Pagebreak

Static Files Options

Options for static files - boot image and firmware image will be set.

...

1. From System or Group > Profile, click Users.
   
   

2. Click Add to add an Auto Configuration User.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add User Image Added

   Pagebreak

   Image Removed

    

3. Configure the following:
   1. User ID
   2. Last Name
   3. First Name
   4. Initial Password
      
      

4. Click OK to create the new user.

   Ntew

   Panel
   borderStyle none
   Caption 0 Figure 1 Create	New User Data  Image Modified

    

    
5. Edit New User and configure the Authentication Service and Password.
   
   

6. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Manage User Image Modified

   Pagebreak

    

7. Access User Profile> Assign Services.
   
   
8. From Available Services, select Authentication, and then click Add to move Authentication to User Services.
   
   
9. Click Apply to save the selection.
   
   

10. Click OK to return to the User Profile.

    Panel
    borderStyle none
    Caption 0 Figure 1 Assign Services  Image Modified

11. Access Utilities> Authentication.
    
    
12. Enter the new authentication password.
    
    
13. Re-enter the new authentication password.
    
    
14. Click Apply.
    
    

15. Click OK to return to Utilities.

    Panel
    borderStyle none
    Caption 0 Figure 1 Authentication Image Modified

    Pagebreak

     

Creating Device Profile Instance

...

1. Login as admin and select Resources > Identify Device Profiles.
   
   
2. Click Add to create a new profile instance. In the example below, device profile named SBC2000-TCA-profile is newly created with user name autoconfig-admin.
   
   
3. Assign a name to new Identity/Device Profile.
   
   
4. From the Identity/Device Profile Type drop down box, select Sonus SBC-1000_2000_DM.
   
   
5. In the Host Name/IP Address field, enter the Host Name or IP Address of your SBC.
   
   
6. From the Transport drop down list, select UDP.
   
   
7. In the MAC Address field, enter the MAC Address of your SBC.
   
   
8. Click Use Custom Credentials.
   
   
9. Enter the Device Access User Name and Password.
   
   

10. Click OK to create new Identity/Device Profile.

    Panel
    borderStyle none
    Caption 0 Figure 1 Create Device Profile Instance Image Modified

Creating Custom SBC Configuration Template with Tags

...

The tags are identified by a keyword starting and ending with "%" character (for example, "%BWMACADDRESS%).  A tag name is case sensitive.  There are predefined set of tags defined by Broadworks Device Management; the first two characters of the tags start with "BW". Tags are replaced with the actual parameter values in the configuration files. Some configuration settings can be generic (i.e., domain name, Time Zone, DNS server) and are applicable to many devices. Some configuration settings are specific to each node (i.e., Device Name, IP address). System tags are created for system-wide use; device-specific tags are created for individual nodes.

Pagebreak

System Tags example

...

1. Select Utilities > Device Configuration. 

2. Select the device profile type created and click Edit.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add Tags Image Modified

   
   

3. The Configure Device Profile Modify Page is displayed. From this Page, select Custom Tags. On the custom Tags page, click Add to provision each device tag.

   Caption
   0 Figure 1 Custom Tags - Add

   Values should be assigned to all the Tags defined.

 

Pagebreak

Upload Template configuration Files

...

1. Select Edit to add a System or Device Template file.

Panel
borderStyle none
Caption 0 Figure 1 Uplodad Template Configuration Files Image Modified

 

Both the system template and device template files should be added.

Panel
borderStyle none
Caption 0 Figure 1 System and Device Template Files Image Modified

Pagebreak

 

Rebuild options generates the configuration file replacing the tag values.

...

1. Browse to Profile > Address page for the selected user and select the profile Instance.

Panel
borderStyle none
Caption 0 Figure 1 Add Uses to Profile Instance Image Modified

 

Step 2: Sonus SBC Edge Configuration

...

Info
All configuration is completed through the WebUI.

Pagebreak

Create Contact Registrant Table for Authenticated User

1. Access SIP > Contact Registrant Table.
   
   
2. Create a new Contact Registrant Table.
   
   

3. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 SIP Contact Registrant Table Image Modified

4. Access SIP > Contact Registrant Table and select the table you created (i.e., Broadsoft CRT).
   
   
5. From Type of Address Record, select Remote.
   
   
6. Configure the Address of Record URI (this the Address of Record URI of the Authenticated User).
   
   
7. Add a SIP Contact for the Authenticated User.
   
   
8. Configure Contact URI Username for the Authenticated User.
   
   

9. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add Contact Registrant Table Image Modified

10. Click OK to save changes.

    Panel
    borderStyle none
    Caption 0 Figure 1 SIP Contact - Save Changes Image Modified

    Pagebreak

     

11. View the Authenticated User Contact Registrant Table with the new entry.

    Panel
    borderStyle none
    Caption 0 Figure 1 View Authentication User Contact Reigstrant Table Image Modified

Create Remote Authorization Table for Authenticated User

1. Access SIP> Remote Authorization Tables.
   
   
2. Create a Remote Authorization Table.
   
   

3. Click OK. 

   Panel
   borderStyle none
   Caption 0 Figure 1 Create Remote Authorization Table Image Modified

4. Access SIP> Remote Authorization Tables and select the table you created (i.e.,Broadsoft Remote Authorization Table).
   
   
5. Create a new Create Remote Authorization Entry.
   
   
6. In Realm, enter the Broadsoft server FQDN.
   
   
7. In Authentication ID, enter the Authenticated User.
   
   
8. In Enter Password and Confirm Password of the Authenticated User, match the Broadworks XSP Password.
   
   
9. From the From URI User Match drop down box, select Regex.
   
   
10. In Match Regex, enter the Regex for the Authenticated User's number set on Broadworks XSP.
    
    

11. Click OK to save changes

    Panel
    borderStyle none
    Caption 0 Figure 1 Add Remote Authorization Entry Image Added

    Pagebreak

    Image Removed

     

12. View the new Authenticated User Remote Authorization entry.

    Panel
    borderStyle none
    Caption 0 Figure 1 Authentication User Entry Image Modified

Create SIP Server Table for Broadsoft

1. Access SIP > SIP Server Tables.
   
   
2. Create a SIP Server Table.
   
   

3. Click Ok.

   Panel
   borderStyle none
   Caption 0 Figure 1 Create SIP Server Table Image Modified

4. Access the SIP Server Table you created (i.e., Broadsoft server).
   
   
5. From the Create SIP Server drop down menu, select DNS-SRV.
   
   
6. In the Host field, enter the Broadsoft server FQDN.
   
   
7. From the Remote Authorization Table drop down list, select Broadsoft Remote Authentication.
   
   
8. From the Contact Registration Table drop down list, select Broadsoft CRT.
   
   

9. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add SIP Server Image Modified

   Pagebreak

    

10. View the new Broadsoft server entry.

    Panel
    borderStyle none
    Caption 0 Figure 1 Broadsoft Server - New Entry Image Modified

Modify Default SIP Profile

...

1. Acess SIP > SIP Profiles> Default SIP Profile.
   
   
2. From the FQDN in From Header drop down list, select Server FQDN (for FQDN in From Header).
   
   

3. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Modify Default SIP Profile Image Modified

Install Certificates for XSP security

...

1. Access Security> SBC Certificates> Trusted CA Certificates.
   
   
2. Click Upload to open the Import Trusted CA Certificate window.
   
   
3. For Mode, select File Upload.
   
   
4. Browse to the XSP Certificate File location and select the XSP Certificate.
   
   
5. Click OK to import the certificate.
   
   

6. Repeat step 4 to import the second XSP Certificate.

   Panel
   borderStyle none
   Caption 0 Figure 1 Install Certificates Image Modified

   Pagebreak

Setup Autoconfiguration Task

...

1. In the WebUI, click the Tasks tab.
   
   
2. In the left navigation pane, click BroadSoft Provisioning > Auto Configuration.
   
   
3. Configure the fields, as required. For field definitions, see Managing Auto Configuration.
   
   

4. Click Apply. Updates are performed in the following order: Boot Image, Firmware, and Configuration Update. The system reboots following configuration.

   Panel
   borderStyle none
   Caption 0 Figure 1 Setup Autoconfiguration Task Image Removed Image Added

Start XSP Download

Info
This step is completed by a BroadWorks administrator.

1. Browse XSP> System or Group> Resources> Identity/Device Profiles.
   
   
2. Click Search and edit SBC2000-TCA-profile.
   
   
3. Click on the Files tab.
   
   

4. Click Reset the Phones to start the Download from the XSP server.

   Panel
   borderStyle none
   Caption 0 Figure 1 Start XSP Download  Image Modified

 

...

1. Pagebreak