Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c85bb25531015bc4122a4f00038a00a0c862eadf5e0163170affe7001b, userName='null'}
JIRAIDAUTHCHOR-5032
REV5UserResourceIdentifier{userKey=8a00a0c85bb25531015bc4122a4f00038a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a0c85bb25531015bc4122a4f00038a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c99e02c0, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc7d083d8a00a02355cd1c2f0155cd26cb230570, userName='null'}

CSS Stylesheet
img.confluence-embedded-image { display: inline-block !important; }

...

To Create a Link Monitor Table entry:

Excerpt Include
UXDOC122:Managing Link Monitor Configuration TablesUXDOC122:
Managing Link Monitor Configuration Tables
nopaneltrue

Modifying a Link Monitor Configuration Table entry

Include Page
UXDOC122:_Modify_EntryUXDOC122:
_Modify_Entry
nopaneltrue

Creating a Link Monitor Configuration Table Entry

...

Settings - Field Definitions

...

ParameterDefinition
Monitor Type

...

bgColor#FAFAFA
borderStylenone

Valid entries:

CAC/IPSEC. Link is monitored via CAC/IPSEC profile.

(READ ONLY) Link is monitored for problems on the default route to the ISP. The SBC recognizes when the Internet destination is not reachable from a given (preferred) ISP; all subsequent calls are routed (via backup default route) to the secondary ISP to reach the intended Internet destination. For details on configuring a Backup Default Route, refer to:

...

Info
titleNote

Both CAC

...

and Backup Default Route are available

...

for both SBC 1000/2000 and SBC SWe Edge.

...

For SBC SWe Edge, Monitor Type is a read-only option and is always set to Backup Default Route. 


Monitored Peer Type

...

bgColor#FAFAFA
borderStylenone
Specifies the type, either host or gateway, that the link is monitoring.
If the peer type is host, the ICMP Echo and Echo Reply is the the protocol used. If the peer is a gateway, the protocol is ARP request/reply.
Host Name

...

...

Specifies the address of the host to monitor. The entry must be in IPv4 format or the Fully Qualified Domain Name (FQDN) of the host being monitored. This field is visible only when Host is selected from the Monitored Peer Type drop down list.
Gateway IP Address

...

The IP address of the gateway. This field is visible only when Gateway is selected from the Monitored Peer Type drop down list. 

...

Lync CAC Profile

...

bgColor#FAFAFA
borderStylenone

...

This field only applies when Monitor type is configured for CAC/IPSEC, and visible only when Gateway is selected from the Monitored Peer Type drop down list.

Note

This setting applies to SBC 1000/2000 only.

Service Status

...

bgColor#FAFAFA
borderStylenone

The Service Status field indicates the link status of the Link Monitor to the monitored host. Status entries include:

Initializing: Green

Down: Red

Ready: Blue

Active: Green

Degraded: Yellow

Display

...

Click on the Counters option to obtain detailed information of the Host. The Link Monitor Counters screen details the Gateway, Number of Poll Attempts, and Number of Successful Polls.
Poll Period

...

Specifies the polling interval, in seconds, for testing the link status. The host or the nexthop gateway specified by HostIPAddress is probed once each specified interval.

For Default Backup Route configuration, if a faster failover is desired, update the Poll Period, Failed Polls for Down State, and SuccessfulPolls for Up State, as desired.

Failed Polls for Down State

...

...

Specifies the number of consecutive failed polling attempts made against the host specified in Host IP Address field after which the host is declared to be in a down state. When the gateway is declared down, the

...

backup default route is the default configuration. 
Successful Polls for Up State

...

Specifies the number of successful polls made against the host specified in the Host IP Address field before declaring this gateway or host as service ready.

Associated IPsec Tunnels

...

bgColor#FAFAFA
borderStylenone

Use this field to select a maximum of four pre-configured IPsec tunnels.

This field only applies when Monitor type is configured for CAC/IPSEC, and visible only when Gateway is selected from the Monitored Peer Type drop down list.

Note

This setting applies to SBC 1000/2000 only.

Switch Back to Primary Gateway via Link Monitor

The SBC 1000/2000 Edge recognizes that the Internet destination is not reachable from a given (preferred) ISP, and all subsequent calls are routed (via backup default route) to the secondary ISP to reach the intended Internet destination. The system automatically reconfigures the Default Gateway from Primary to Backup whenever the network failure on the Primary Link is detected.

...