Page History

...

For a High Availability (HA) pair configuration, the

Spacevars
0 series4

 allows configuring a Static Route for a specific host or CE Name among the active and standby hosts of a HA pair configuration using the Condition element . The Condition element store to store the conditions based on the basis of which routes are added to a

Spacevars
0 product

 pair with HA configuration. Currently, the Condition element only supports the CE Name element.

Info
title Note
Before configuring the Condition using a specific CE Name, ensure that the IP Interface Group Name and IP Interface Name are configured. These You cannot configure and save these three elements cannot be configured and saved simultaneously. For further details, refer to System Provisioning - IP Interface Group and IP Interface Group - IP Interface. Static Routes with specific CE Name can be added only You can only add Static Routes with specific CE Names for packet interfaces.

On the

Spacevars
0 product

 main screen, navigate to All > Address Context > Static Route > Condition.

The Condition window is displayed.Figure 1: Condition Window

Select appropriate values from the Address Context and Static Route drop-down lists.

Select the CE Name from the drop-down list. 

To save the changes, click Save. To cancel all changes, click Undo Edits.The parameters in the Condition window is described below:

Table 1: Parameters - Condition window

Info
title Note
The Spacevars 0 product does not allow to edit the Condition for a Static Route. To change the configuration of Condition, delete the Static Route and reconfigure it. The Spacevars 0 product does not allow to delete deleting the CE Name separately. A Static Route is deleted only from the instance in which it is configured, and not from both active and standby instances of a HA pair Spacevars 0 product configuration.

...